Lutron Dimming Interface 5A capacity, GRX-TVI Ten Volt Interface

Lets a Control Unit switch and dim fluorescent lights that have Lutron Eco-10TM (TVE Series) Electronic Dimming Ballasts.

Please note: this item is non-returnable; we cannot take it back for a refund. Please make sure this item is the right item you require before ordering it online.

More features

• Switches and dims any 0-10V electronic fluorescent dimming ballast powered by 100-277V (ballast must source/provide 10V supply). Switches up to 10A of electronic capacitive fluorescent ballasts.
• Also switches motors – 1/4HP @ 100-127V, 1/2HP @ 200-277V.
• Lets you connect up to five Ten Volt Interfaces to one Control Unit zone. This allows one zone to control up to five 16A circuits of Eco-10TM (TVE Series) Electronic Dimming Ballasts or five motors.
• Provides 100-277V power to loads.
• Requires 100-127V or 200-240V power for internal operations.

Technical Specs

• Power
  - Load (output) power: 100-277V. Phase independent of lighting control.
  - Control circuit: 40W/VA @ 100-127V or 200-240V, 50/60Hz, same phase as lighting control. Provides power for internal operations.
• O-10V Dimming Control
• Output rating: 10 microA-300mA.
• Sinks current only (ballast must source/provide 10V supply).
• Zone Capacity
• Up to five Ten Volt Interfaces per Control
• Unit zone.
• Key Design Features:
  - Complies with standard UL 508.
  - Provides a Class 2 isolated 0 -10V output signal that conforms to EN60929 and IEC929.
  - Accepts a constant-gate drive fluorescent signal (100 -127V or 200 -240V; 50/60Hz).
• Terminals: Up to two #12 AWG (2.5mm2) conductors.
• Physical Design:
  - Wall-mounted. Indoor use only. Type 1 enclosure.
  - Weight: 4.25 pounds (2kg).
• Environment: 32-104°F (0-40°C). Relative humidity less than 90% non-condensing.