Lutron QS International seeTouch 5-button Wall Station in Satin Nickel Non-Insert Style with Raise/Lower QSWE-5BRLN-SN

5-Button Wallstation with Raise/Lower; Lutron QS Wallstation 5 Button with Master Up & Down, SeeTouch wallstation in Satin Nickel. This is the International Lutron seeTouch QS non-insert style 5-button wallstation with raise/lower in a Satin Nickel Finish.

Please note: this item is on clearance and it is now at a lower price; it is available as stock lasts. Furthermore, this item is non-returnable; we cannot take it back for a refund. Please make sure this item is the right item you require before ordering it online.

• Often used to select and adjust scenes.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it easy to find and operate the Wallstation in low light conditions.
• Optional button engraving is angled up to the eye for easy reading.
• Master raise/lower brightens or dims all lighting or raises/lowers all assigned shades in the last selected scene or toggled group.
• Options for programming buttons after installation (choose one):
  # Recalls preset light levels for scenes (1-4 and Off, 5-8 and Off, 9-12 and Off, 13-16 and Off, or 1-5, 5-9, or 9-13).
  # Each button will toggle a zone or a group of zones.
  # LEDs reflect door status of five partitions.
• Shade control features:
  # Can control Sivoia® QS Window Treatments.
  # Pressing the Open (or Close) button once will cause the window treatments to move to their fully open (or closed) position. Tap any button (regardless of function) to stop a shade that is in motion.
• Receives up to two contact closure inputs via a connector on the back of the Wallstation.
• Contact closure features:
  # When keypad is programmed as scene, zone toggle, or shade control, input 1 closure will perform the top button action, and input 2 closure will perform the bottom button action.


• # When keypad is programmed as a partition control, input 1 controls the partition programmed to the top button (closure = open partition; opening = close partition) and input 2 controls the partition programmed to the bottom button (closure = close partition; opening = open partition).