Lutron Rania RF Wireless Switch Frameless Faceplate in Arctic White RS-SA05-B-FAW-M

This is the Lutron RS-SA05-B-FAW-M Rania wireless RF switch which works together with many other Lutron Radio PowrSavr wireless ceiling mounted occupancy / vacancy detectors. It comes in an arctic white finish and it has a frameless faceplate. 

The Rania Wireless RF Switch is a two-wire switch offering a retrofit solution with no neutral required. For the customer desiring energy savings, the Rania Wireless RF Switch can be controlled by Lutron's Radio Powr SavrTM wireless ceiling-mount occupancy/vacancy sensor.

Lutron RS-SA05-B-FAW-M Wireless Rania Switch - Features

• Two-wire switch - no new wiring required.
• Clear ConnectTM RF Technology allows for communication with other Lutron Radio Frequency (RF) devices.
• Multi-way functionality through Rania Accessory Switches.
• Power failure memory: Should power be interrupted, the control will return to its previous state.
• Operation
  - On/Off button turns lights on and off: Tap once to turn on, tap again to turn off.
  - Press and hold On/Off button for 0.5 seconds to activate Delayed Off. As On/Off button is held, LED will begin to flash to represent a 30 second Delayed Off.
  - Green LED indicates if the load is on, and glows softly as night light when load is off.

Lutron Rania Wireless RF Switch - Specs

• CE Mark
• For multi-way switching, use only one Rania Wireless RF Switch with up to 9 Rania Accessory Switches.
• Voltage: 220 - 240 V~ 50 Hz
• Radio Frequency: 868 MHz
• Minimum Load: 25W
• Maximum Load: 5 AX, 4A for motor loads
• Load Types: Fluorescent, Compact Fluorescent Lamps (CFLs), Incandescent, Halogen, Electronic Low-Voltage, Motor Loads, Magnetic Low-Voltage (Maximum transformer size of 100 VA. Multiple transformers can be used for up to 5 A of total load.)
• Ambient operating temperature: 0 °C to 40 °C.
• 0% - 90% humidity, non-condensing.
• Dimensions: 86.1mm x 86.1mm, 7mm projection, max. 21mm depth
• Type: frameless faceplate
• Finish: Arctic White
• Indoor use only
• Wiring: Maximum wire length between the Rania Wireless RF Switch and the furthest Rania Accessory Switch is 50 m.
• Mountable in round or square back boxes with a minimum depth of 35 mm.
• Trim ring is available for 25 mm back boxes.
• Rania Wireless RF Switch controls communicate with the ceiling mount occupancy sensors through RF.
• Controls must be located within 10 m of a ceiling mount occupancy/vacancy sensor.
• Two Year Limited Warranty.
• In certain applications, a shunt capacitor will need to be added at the load for proper operation. This is most common for non-dimmable CFLs.
• The product is packaged with a 0.47 µF X1 capacitor with flying leads rated for 310 V~