Manual Thermostat in White with Dial for Temperature Adjustment for Loads up to 3.4kW, BN Thermic A16C

The BN Thermic A16C is a white simple and elegant manual wall thermostat for adjusting the temperature via a basic dial. It is operated via a ON/OFF switch and is capable of switching loads up to 3.4kW.

It can be configured to act as an ‘air and floor’ sensor as well as ‘floor sensor only’, meaning it can be used to operate a radiant floor and measure the air temperature. It is compatible with the entire BN Thermic M150 Series of underfloor heating mats. 

BN Thermic A16C Manual Thermostat - Features

• Smart uncluttered appearance.
• Ideal for controlling underfloor heating. 
• Supplied with floor probe.
• Air & Floor sensor or Floor only sensor settings.
• Simple stylish control.
• A dial for temperature adjustment.
• On/Off switch.
• Capable of switching loads of up to 3.4kW.
• Configurable for ‘air and floor sensor’ or ‘floor sensor only’.

AC16C Manual Thermostat - Technical 

• Description: Manual thermostat with air and floor sensor and on/off switch (can be used with floor sensor only)
• Temperature sensing: Electronic
• Mounting: Wall – semi-recessed in standard single-gang box
• Heating cycle length: 15 minutes
• Adjustable range: +5°C to +30°C
• Setpoint range: 7°C, 15°C to 35°C (45°F, 59°F to 95°F)
• Maximum temperature limit: 15°C to 35°C (59°F to 95°F)
• Storage: -20°C to 50°C (-4°F to 120°F)
• Switching capacity: 15A 230V (larger loads and 3 phase loads can be switched via a suitably rated contactor)
• Contacts: Single-pole single-throw
• Voltage supply: 230V
• Dimensions: 82mm (length) x 78mm (width) x 17mm (depth) – when installed
• IP rating: IP20 rated