Mirror Demister Pad 1500mm x 500mm 135W, IP45 rated Thermomirror Pro De-Steamer Pad 5305

This is the Thermomirror 5305 - a Mirror Demister Pad 1500mm x 500mm 135W, IP45 rated Thermomirror Pro De-Steamer Pad.

The Thermomirror Mirror Demister Pad PRO will aid you with the long-standing problem of dealing with a steamy mirror after a hot bath or shower. These pads can be wired up to your light switch, underfloor heating circuit or even movement sensor to ensure that mirrors stay condensation free. 

The pad measures 1500mm x 500mm for placement under your mirror (great for a larger rectangular mirrors, a double size mirror), with a gentle heat output of 135W. The Thermomirror PRO is easily adhered to the back of the mirror with included self-adhesive strips and with wiring into your existing electrics. After this, it can be mounted with Mirror Bond Adhesive or supplied fixings: then you can get ready to enjoy a condensation free mirror!

The ultra-thin 0.4mm Demister pad comes in a range of applicable sizes and can be cut to length as needed with ease, depending on the size of your mirror. It is essentially an easy way to add a touch of luxury and usability to your precious bathroom space. 

It is rated IP45, making it suitable for use in any and all bathrooms. Furthermore, multiple Demister pads can be wired together in parallel for larger-sized mirrors. 

1500mm x 500mm Mirror Demister Pad 135W - Features

• Dimensions: 1500mm (width) x 500mm (height)
• Available in different sizes, as needed
• Also called: heated demister pads, demister pads, heated mirror demister pad, or mirror demister pad.
• Bespoke lengths up to 10m available
• Can be used single or in multiples
• Self adhesive demister Thermomirror
• Can be wired in parallel
• Tested to 2500V
• Model no: Themomirror 5305
• Dimensions 1.5m x 0.5m
• Heat output: 135W
• 10 year warranty
• Mirror Demister Pad - Technical
• Ensures a completely condensation free mirror
• Fully self adhesive backing
• Just 0.4mm thick
• Simply connect to existing electrics with the single connection wire
• Wire multiple Thermomirror pads in parallel for large mirrors
• Mains voltage 230V
• Use your mirror straight after a hot bath or shower and improve the bathroom experience
• Simply sticks to the back of your mirror – no extra tape required
• Ultra thin and unobtrusive to remain discreet yet effective
• Easy installation into your existing lighting, underfloor heating or movement sensor circuit
• Use multiple mats in parallel to cover larger areas or multiple mirrors with ease
• No bulky transformers, simply connect the wires to your existing circuit