IMO PB01C Non-Illuminated Momentary Push Button – 22mm Black Flush Actuator
£6.82
Ex. VAT
(over £100+VAT, applies to zone A only , £6 +VAT otherwise)
Order online & collect in store
This is the IMO PB01C Non-Illuminated Momentary Push Button – a 22mm Black Flush Actuator available at SparksDirect for the best price. Purchase this item with confidence at Sparks today.
The IMO PB01C is a 22mm modular push button featuring a flush, black actuator. It operates with a momentary action, meaning the electrical state only changes while the button is physically held down and returns to its original position once released. This makes it ideal for "Start" or "Pulse" commands in control logic. The IMO PB01C is a high-quality, non-illuminated push button from the IMO modular control range. It is designed for panel mounting in industrial control circuits, providing a reliable manual interface for starting, stopping, or resetting machinery and automated systems.
Built for durability in harsh environments, the unit is constructed from high-grade, impact-resistant materials and carries an IP65 rating, making it dust-tight and protected against water jets. Its modular design allows for easy assembly; the actuator clips onto a standard mounting collar (sold separately), which can then hold multiple contact blocks (NO or NC) depending on the specific switching requirements of your circuit.
Technical Specifications
- Model Number: PB01C
- Type: Momentary Push Button (Non-Illuminated)
- Actuator Profile: Flush
- Actuator Colour: Black
- Mounting Diameter: 22mm
- Ingress Protection: IP65
- Mechanical Life: > 1,000,000 cycles
- Material: UV-stabilised polycarbonate
- Operating Temperature: -25°C to +70°C
- Standards: IEC 60947-5-1, EN 60947-5-1, UL Approved, CE
Frequently Asked Questions
Q: Does this include the contact blocks?
A: No. The PB01C is the actuator (the part you press). To complete the assembly, you will need a mounting collar and at least one contact block (e.g., a Normally Open block for a start function).
Q: Can this be used outdoors?
A: Yes. The IP65 rating ensures it is protected against rain and dust. The materials are also UV-stabilised to prevent the black finish from fading or becoming brittle in sunlight.
Q: What is the difference between "Flush" and "Projecting" buttons?
A: A flush button like the PB01C sits almost level with the mounting surface to prevent accidental activation. Projecting buttons stick out further, making them easier to press with gloves but more prone to being hit by mistake.
Who can install this?
Installation should be performed by a qualified electrician or panel builder. The installer must ensure the 22mm hole is cleanly cut and that the mounting collar is tightened sufficiently to maintain the IP65 seal against the panel face. Correct selection and wiring of the associated contact blocks are essential for the safe operation of the connected machinery.
What is this for?
The IMO PB01C is a standard component for Industrial Interface Panels:
- Machine Start/Stop: Used as a manual input for motor starters and PLC (Programmable Logic Controller) inputs.
- Control Panels: Integrated into custom electrical enclosures for HVAC, pumping stations, and conveyor systems.
- System Reset: Serving as a "Manual Reset" button to clear faults after a safety relay has tripped.
- Pulse Commands: Providing short electrical pulses for jogging motors or indexing machinery during setup.
Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.
Shipping
Sparks Direct delivers via courier to the UK only; the standard delivery charge is £6 + VAT for all orders under £100 + VAT. If your order is over £120, you get free delivery (unless there's a special delivery charge for the items you wish to order or you're in shipping zone C or D). Full details for shipping charges can be found via Terms and Conditions.
If the items you order are in stock and the order is placed before 1.00pm, delivery can be made within 1-2 working days. If the items are not in stock, we will inform you via email how long it will take or ask for your confirmation if there's a long lead time.
Returns
We offer 30-day returns for unwanted items - please email us to request a returns number which will need to be quoted when the items are returned. For faulty items or items damaged in transit, please advise via email, and an appropriate returns number will be provided. Full details concerning returns and refunds can be found via our Terms and Conditions.
