Quickwire Splitter Junction Box for Lighting, for Connecting Multiple Luminaires, Quickwire QSP34

Model No. QSP34
£3.40 Ex. VAT

Free delivery
(over £100 +VAT, applies to zone A and B only, £6 +VAT otherwise)

Normally In Stock

Click & Collect

Order online & collect in store

Our customers love us - read their reviews

Wishlist Ask a question Compare

This is the Quickwire QSP34 maintenance free splitter junction box ideal for connecting multiple luminaires. It has to be used in conjunction with a Quickwire switch and load.

When you connect to the "load" inlet of your Switch & Load, you can create three separate "load" connections. And if your circuit has more than three luminaires, then you can use one inlet on your initial splitter to connect to another splitter; you can then repeat this as many times as you need it. 

Most of the time when you use a Quickwire Switch & Load, you also need a Splitter as well. The reason you need a Splitter is because, especially in the UK, you need it to connect up to the other light fittings in the circuit - and you can't do that just with the Switch & Load. 

Quickqire Splitter Junction Box for Lighting - Features

  • Rating: 16A 250Va.c.; Overcurrent protection limited to 16A
  • Standards: BS EN 60670-22, BS 5733-MF
  • Conductor Size: 1.0mm² – 1.5mm² Twin & Earth (CPC) Solid cores, Class 1 (conductors)
  • Dimensions: 23mm x 31mm x 84mm (cable entries inserted)
  • IP Rating: IP30 rated
  • Small and compact size, ideal to fit into small ceiling voids and tight spaces.
  • Easy to use: no screws, no clips, no clamps, and no cover! No fuss!
  • it comes pre-wired, and it is clearly labeled for error-free wiring. 
  • Maintenance free: with screwless push-fit terminals for use in inaccessible places. 
  • It has a compact design, small enough to fit through a 32mm diameter hole. 
  • The cable can be clipped into place and installed in a matter of seconds. There's no need to sheath the earth. Less materials and less time and less tools. 
  • Cable preparation: Cut and strip the 1.0mm² / 1.5mm² solid core, flat twin and earth cable.
  • If required the Quickwire can be fitted onto a surface using the Quickwire mounting clip (order separately). 

 

Follow us for exclusive offers and tips about lighting, switches and sockets

Get in touch

Telephone 020 7263 8007

Fax 020 7272 3007

Sparks Electrical Wholesalers Ltd, 659-661 Holloway Road, Archway, London, N19 5SE, United Kingdom
Registered in England. Company No. 2238028. VAT Reg No: GB 505 6899 17. Copyright © 2003-2019 SparksDirect

Award Winning Ecommerce from Cyber-Duck