This is the Rako RCM070 7 button lighting 4 scene off + raise lower control module. It is wireless, battery powered, and comes in a black finish; it requires a faceplate - see the Required items for the correct finish.
Please note: this item is non-returnable; due to the fact that it has an electronic component, we cannot take this item back for a refund.
The RCM-070 button panel has addressing switches on the back to setup rooms and houses. Setting two panels with the same addresses allows two way control within a room. The panels select scenes stored within the dimmers, so having more than one such wall panel does not give you more scenes.
This wireless panel can either be surface mounted (using the patress, which gives a depth of 14mm), or flush mounted (into a standard single gang UK back box).
The Rako RCM070 7 button wireless controller is Lithium battery powered with battery life calculated as being 3 years (based on pressing a button 30 times a day); you don't need to run cabling - you can mount this controller anywhere in the house.
The RCM wireless control modules have a "hard button" design and are styled to match the WCM range of wired control panels. They require a front plate (which needs to be ordered separately), and they can be installed as surface mounted.
It is based upon the widely used 50mm x 50mm Euro Module switch plate accessory standard, so it is suitable for all switch plates that use a 50mm x 50mm grid and cover plate arrangement. No need for data or power cabling, since it has the Rakom coded radio transmission, ensuring the system is installed with no fuss or disruption.
Fixing: it can be flush mounted into a standard UK single gang back box, minimum 12mm deep. When surface mounted, use a standard single gang UK or European back box or direct to flat surface.
The unit provides full scene programming.
Input supply: 6V DC given by 2 x 3V Lithium coin cell CR2016 (remote power supply version available)
Weight: 100g
Battery life: more than 3 years
Dimensions: 50mm x 50mm x 12mm when it is flush mounted, and 92mm x 92mm x 14mm when it is surface mounted
Wireless communication: Rakom coded fm radio, 433.9MHz
Climate range: Temperature +2 deg C to +40 deg C, humidity +5% to 90% non-condensing
Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.
How do you control/manage all the Rako blobs - the Rako Wireless Dimmers? The wall-mounted Rako RCM-070 is a 7 hard button wireless controller designed to be mounted anywhere(be it flush mounting to UK back boxes or simply surface mounted to any flat surface using the patress provided). The RAKOM-coded radio transmission technology incorporated into the Rako RCM-070 Hard Button Wireless Controller Module eliminates the need for any data or power cabling - ensuring that the system can be without any fuss or disruption. The Rako RCM-070 Hard Button Wireless Controller Module needs the matching plates - there's a range of face plates (the Rako RLF-070 face plates, see the full list below) that compliment the decor of your room, like, the Black nickel plate (Rako RLF-070-BN), the stainless steel plate (Rako RLF-070-SS), the mirror stainless steel plate(Rako RLF-070-MSS), and the polished brass plate (Rako RLF-070-PB).
The Rako RCM-070 Hard Button Wireless Controller Module - Features
This is the Rako New 7 Hard Button Wireless Controller - it Requires a Face Plate - the Rako RCM-070;
RCM wireless control modules have a new "hard button" and are styled to match the WCM wired contol panels, RCM units are modules only and always require a front plate kit either RVF (screw fixing) or RLF (screwless);
This device is the Rako RCM-070 wireless 7 Button lighting module with 4 scenes, off & master raise & lower buttons;
The Rako RCM-070 is a wireless 7-button wall-mounted control panel providing 4 scenes plus off and master raise and lower. (excludes cover plate kits) The unit provides full scene programming;
The RCM-070 push button wall plate controllers are designed to be mounted anywhere, be it flush mounting to UK back-boxes or simply surface mounted to any flat surface using the patress provided;
The RAKOM-coded radio transmission eliminates the need for any data or power cabling ensuring that the system can be installed with minimum fuss and disruption;
Power Options: Externally powered via a 12V DC power supply rather than the Lithium coin cells used in the RCP07 wall plate controller. (Power supply not included). Lithium battery powered so can be mounted anywhere without having to run cabling;
Cover plate kits are required - Flat metal cover plate accessory kits are available in a variety of standard finishes including:
# Rako 7-Button lighting screwless plate kit in Black nickel - the Rako RLF-070-BN;
# Rako 7-Button lighting screwless plate kit in mirror stainless steel - the Rako RLF-070-MSS;
# Rako 7-Button lighting screwless plate kit in polished brass - the Rako RLF-070-PB;
# Rako 7-Button lighting screwless plate kit in stainless steel - the Rako RLF-070-SS;Buy Rako Wireless Dimming System at Sparks
Shipping
Sparks Direct delivers via courier to the UK only; the standard delivery charge is £6 + VAT for all orders under £100 + VAT. If your order is over £120, you get free delivery (unless there's a special delivery charge for the items you wish to order or you're in shipping zone C or D). Full details for shipping charges can be found via Terms and Conditions.
If the items you order are in stock and the order is placed before 1.00pm, delivery can be made within 1-2 working days. If the items are not in stock, we will inform you via email how long it will take or ask for your confirmation if there's a long lead time.
Returns
We offer 30-day returns for unwanted items - please email us to request a returns number which will need to be quoted when the items are returned. For faulty items or items damaged in transit, please advise via email, and an appropriate returns number will be provided. Full details concerning returns and refunds can be found via our Terms and Conditions.
Please fill in this form to enquire about this product, telling us the quantity you require and your contact details. We will advise via email within 1-2 working days. Thank you.
-750x750.jpg "Rako RCM-070 7 Button Wireless Wall Control Panel, 7 Button RF Push Button Module (requires face plate)")
-270x270.jpg "1 Gang Slim Grid Kinetic Switch White Plastic for Culina Grid Plate CUL-42495")
