Rako RLED36-3DCI Wireless 3 Channel (RGB) 36W Constant Current Dimming LED Driver

This is the Rako RLED36-3DCI, a wireless (RGB) 36W constant current dimimg LED driver suitable for ceiling or cupboard mounting.

Rako RLED36-3DCI Wireless LED Dimming Driver - Features

• A compact 3 channel 36W constant current LED driver with in-built RF receiver and Rako processor. 
• For control of 3 channel constant current LED fittings with selectable outputs of 350, 500, 600 and 700mA.
• When used with 3 colour fittings each colour is allocated a channel and can be individually adjusted allowing complete colour mixing. 
• Simple colour cycling is started/stopped using the raise/lower buttons in a Rako wallpanel or hand held remote.
• Controlled from any Rako Rakom device, e.g. RCP/RCM wall plate or Bridge interface units.
• Designed for use with 3 channel constant current LED fittings with separate +ve and -ve connections. Note some fittings with a common return can be modified to enable their use.
• Maximum wattage of 36w with a forward voltage range or 3-42V (equates to 12 x 1w LEDs per channel). 
• It requires a suitable external d.c. power supply such as the Rako RAPSU48v36w. 
• Selectable current ratings of 350, 500, 600 and 700mA via jumper connectors. 
• Programmed using either an RCM/RCP RF wallplate or the RASOFT PC software suite, the unit stores the house, room and channel address plus 16 preset scene levels in non volatile memory.
• The RLED36-3DCI dimmer can be controlled from any Rako transmitter such as RCM/RCP wallplates, RAH hand helds and Bridge modules and forms the foundation of any Rako scene-set system.

Note: For more information on dimming LEDs refer to Rako's application sheet 'Controlling LED Lighting With Rako Dimmers and Modules'.

Rako RLED36-3DCI LED Dimming Driver - Technical Specs

• Dimensions: 160mm x 50mm x 36mm
• Input supply: 230V AC +/-10% 50Hz
• Weight: 125g
• Housing: UL V0 ABS
• Climate range: Temperature +2C to +40C, Humidity +5% to 95% non Condensing
• Connections: 2 way terminals for d.c. supply, 6 way screw terminals for load connections.
• Protection: Reverse polarity input protection.
• Load types: 3 Channel Constant Current LED Fittings
• Minimum load 3W, maximum load 36W
• Terminal sizes: 1.5mm2 - Stranded, 2.5mm2 - Solid
• Standards: Emissions - EN61000-6-3 : 2001, Immunity - EN61000-6-1 : 2001
• Communication: Rakom coded fm radio, 433.9MHz
• Memory: Flash memory (non volatile)