Remote Activated Timer 1s - 2h, CP Electronics MRT16-REM Time Delay Switch with Remote Activation

Model No. 320A by: CP Electronics.
£33.45 Ex. VAT
This item requires:

Free delivery
(over £100 +VAT, applies to zone A and B only, £6 +VAT otherwise)

Usually 3-5 days

Click & Collect

Order online & collect in store

Our customers love us - read their reviews

Wishlist Ask a question Compare

This CP Electronics MRT16-REM remote activated timer - a multi-range timer - can be used for a number of applications including lighting on a staircase and pump overrun for central heating. It has a tamperproof blank face plate. It can be mounted remotely away from the load it is controlling. 

CP Electronics MRT16-REM Multi-Range Remote Activated Timer

  • Remote Activated Timer
  • Adjustable Timing Range between 1 second and 2 hours.
  • Compatible with 20mm deep single gang BS accessory plate.
  • Switches any type of load
  • Works with any type of lamp

CP Electronics MRT16-REM Time Delay Switch - Technical Specs

  • Load: 
    - 16 Amp resistive load
    - 10 Amp incandescent lighting
    - 6 Amp fluorescent lighting
    - 3 Amp compact fluorescent lighting
    - 3 Amp low energy lighting
    - 3 Amp low voltage lighting (switch primary of transformer) 
    - Fluorescent lighting (max 6 fittings recommended)
    - For fluorescent lighting total power factor correction capacitance must not exceed 40µF
    - 3 Amp fans and ventilation equipment
    - Switch SON lighting loads via a contactor
  • Supply voltage: 220-240 Volts AC 50 Hz
  • Timing period: Adjustable 1 second to 2 hours in ranges
  • Fixing method: Surface fixing 25mm deep plastic surface mount moulded box. Flush fixing 25mm steel wall box or 32mm deep cavity wall box.
  • Terminal capacity: 4.0mm2
  • Material: Flame retardant ABS
  • Class 2 electrical rated
  • Temperature: -10°C to 35°C
  • Conformity: EMC-2004/108/EC, LVD-2006/95/EC
  • Dimensions: 86 x 86mm, 19mm projection, 13mm depth

This tamperproof time delay switch can be mounted away from accessible areas to be operated by a remote slave switch. Three modes of operation are available:

On/Off: activating the slave unit will start the time lag sequence. Operating the slave switch again before the time lag runs out will turn off the appliances.
Resettable: the slave unit starts the time lag sequence; operating it again will restart the time lag.
Non-Resettable: the time delay is started by the slave switch; second operation has no effect until the time delay is over.

As this timer has been designed for general purpose loads, a Neutral feed is required at the switch position. This will allow the timer to be used on various applications from incandescent, fluorescent and compact fluorescent lighting to heating and ventilation loads.

Three different modes of operation can be set on the timer to provide a variety of options to suit particular applications;On/Off Mode: Operating the slave switch will start the timing sequence. Operating the slave switch again during operation will stop the sequence immediately. If the slave switch is not pressed again after initial operation, the timer will switch off after the adjustable preset time period has elapsed.

Resetting Mode: Operating the slave switch will start the timing sequence.
Operating the slave switch again during operation will restart the timing sequence.

Non-Resetting Mode: Operating the slave switch will start the timing sequence.
Operating the slave switch again during operation will have no effect.

The timer will be wired as a master unit, with slave switches used for activation.

Various styles of slave switch can be used, and in most installations only a pair of wires will be required for the slave switches (if the slave switches have neon indicators or backlit buttons, a separate Live and Neutral feed will usually be required to illuminate the neon).

The unit is supplied with M3.5 fixing screws as standard, together with blanking plugs to cover the screw heads.

Switches & Sockets Specific
Amp 10
Back Box Depth 25mm
Brand CP Electronics
Finish White
Gang 1
Insert White
Plate Plastic
Plate Dimensions 86mm x 86mm
Plate Projection / Protrusion 19mm
Style Moulded White
Type Time Delay Switch

 

Follow us for exclusive offers and tips about lighting, switches and sockets

Get in touch

Telephone 020 7263 8007

Fax 020 7272 3007

Sparks Electrical Wholesalers Ltd, 659-661 Holloway Road, Archway, London, N19 5SE, United Kingdom
Registered in England. Company No. 2238028. VAT Reg No: GB 505 6899 17. Copyright © 2003-2018 SparksDirect

Award Winning Ecommerce from Cyber-Duck