1 Gang Double Pole Dolly Switch in Stainless Steel Plate and Dolly from Forbes and Lomax
£46.99
Ex. VAT(over £100+VAT, applies to zones A&B only , £6 +VAT otherwise)
Order online & collect in store
This is the Forbes and Lomax 1GDP/SS, a one gang double pole dolly switch coming in stainless steel, manufactured by Forbes and Lomax. At only 1.8mm thick the brushed stainless steel plates sit flush with the wall and suit contemporary interiors or kitchens.
The wide range of socket outlets that we offer include a selection of network and audio visual sockets to suit the needs of the most high-tech installations. A whole array of fused connections and cooker switches provide all you need to control the power of your kitchen appliances.
- All dolly switches fit into standard 35mm deep wall boxes (with the exception of the architrave switch, which requires a special wall box).
- This is a standard 1 way dolly switch - double pole switch used for higher loads. One way switching can control a lighting circuit from only one location, while two-way switching allows you to control a lighting circuit from two locations.
- Type: 1 gang 1 way DP dolly switch
- Finish: stainless steel plate and dolly switch
- Plate: flat plate
The Forbes and Lomax Dolly Switch
The Forbes and Lomax Dolly Switches are On/off Switches available in 2-way, Intermediate and double pole versions. Retractive dolly switches can be used as dimmer controllers when connected to a dimmer pack or dimming system. 2-way-and-off switches can be used to operate blinds.
The Forbes and Lomax dolly switches can be mixed with Button Dimmer Controllers on the same plate, however they can not be combined with rotary dimmers. The Forbes & Lomax dolly switches are available in: the Invisible Lightswitch® Range, the Antique Bronze Range, the Stainless Steel Range, the Aged Brass Range, the Unlacquered Brass Range, the Nickel Silver Range, and the Verdigris Range.
Technical Information - Forbes and Lomax Dolly Switch
- The Forbes and Lomax Dolly Switch Conforms to BS EN 60669 - 1: 1999 when assembled to appropriate plate and grid and
- installed correctly. ASTA Certificate No: 16240
- All Forbes and Lomax dolly switches require British standard 35mm deep flush wall boxes (to be ordered separately).
- Voltage: 250V AC, 50Hz
- Current rating: 20AX
- Terminal capacities: 4 x 1mm2 (Flex), 4 x 1.5mm2 (Solid), 3 x 2.5mm2 (Solid), 2 x 4mm2 (Solid), 1 x 6mm2 (Solid).
- Ambient Operating Temperature: -5 degrees to +40 degrees Celsius
- IP rating: IP2XD
- Max. installation altitude: 2000m
- No. of operations: 10.000
- Dimensions: 1-2 gang rocker switch 86mm x 86mm; 3-4 gang 146mm x 86mm.
About the Forbes and Lomax Stainless Steel Range
The Forbes and Lomax Stainless Steel range of switches and sockets has brushed stainless steel plates with satin nickel switches and buttons. They offer a more industrial look, being particularly well suited to applications in contemporary interiors and kitchens.
- Cleaning: The plate can be cleaned using a small amount of stainless steel cleaner. These are normally spray cleaners and should be sprayed directly onto the cloth and buffed into the plate. It is recommended that the plate is removed from the wall before cleaning to prevent damage to the wall surface. Alternatively, place a protective piece of card between the plate and the wall before cleaning.
- This range is available in Dolly Switch, Rotary Dimmer, Button Dimmer, Rocker Switch. Furthermore, a full range of socket outlets are available, including power outlets, European sockets, telecom and data, audio and visual, fused connection.
- All switches conform to BSEN 60669-1:2018. 13amp sockets conform to BS1363-2:2016+A1: 2018, 2amp and 5amp sockets conform to BS546:1950
- Single plates measure 86mm x 86mm and double plates measure 146mm x 86mm
- A full range of socket outlets are available, including power outlets, telecom and data, audio and visual, fused connection and floor sockets
- All Forbes & Lomax switches and sockets require British standard 35mm deep flush wall boxes, but we recommend 47mm for ease of installation
Switches & Sockets Specific | |
Back Box Depth | 35mm |
Brand | Forbes and Lomax |
Finish | Stainless Steel |
Gang | 1 |
Insert | No Insert |
Plate | Metal |
Plate Dimensions | 86mm x 86mm |
Style | Flat Plate |
Type | Dolly Switch |
Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.
Need more detailed specs?
Shipping
Sparks Direct delivers via courier to the UK only; the standard delivery charge is £6 + VAT for all orders under £100 + VAT. If your order is over £120, you get free delivery (unless there's a special delivery charge for the items you wish to order or you're in shipping zone C or D). Full details for shipping charges can be found via Terms and Conditions.
If the items you order are in stock and the order is placed before 1.00pm, delivery can be made within 1-2 working days. If the items are not in stock, we will inform you via email how long it will take or ask for your confirmation if there's a long lead time.
Returns
We offer 30-day returns for unwanted items - please email us to request a returns number which will need to be quoted when the items are returned. For faulty items or items damaged in transit, please advise via email, and an appropriate returns number will be provided. Full details concerning returns and refunds can be found via our Terms and Conditions.