4 Gang 2 Way Trailing Edge LED Dimmer 10-120W Victorian Polished Chrome Plain Raised Plate

This is the Heritage Brass CR974/TED, a 4 Gang 2 Way Trailing Edge LED Dimmer 10-120W, Victorian Polished Chrome Plain Edge Plate.

It is part of the Contractor Range from Heritage Brass (M-Marcus).

The Heritage Brass Contractor Range is an extensive collection of high quality solid cast brass plate electrical wiring accessories.

4 Gang 2 Way LED Dimmer Victorian Polished Chrome Plain Raised Plate - Specs

• It is part of the Contractor Range - Polished Chrome raised plate from Heritage Brass.
• It uses a Varilight V-Pro LED dimmer module, trailing edge, and can dim good quality dimmable LED lights up to 120W max.
• Four gang LED dimmer with push ON/push OFF action - rotary dimmer, ideal for dimming LED lights up to 120W, on a flat plate.
• It takes max. 10 LED lamps per module / gang.
• Wattage: min. 10W, max. 120W per module / gang.
• Four gang LED dimmer on a single size plate.
• Suitable for most quality dimmable LED lamps (compatibility is not guaranteed with all LED lamps).

4 Gang Trailing Edge Dimmer (LED Dimmer) - Heritage Brass CR974/TED

• Range: Heritage Brass Contractor Range
• Product: it is part of the Victorian Polished Chrome (CR) from M-Marcus
• Type: 4 Gang Trailing Edge Dimmer (LED Dimmer)
• Plate Finish: Polished Chrome raised plate
• Dimmer Knob Colour / Finish: Polished Chrome
• Dimmer Knob trim: Trimless (no plastic trim around the switch / knob / dolly)
• Height: 147mm
• Width: 86mm
• Fixing Hole Centres: Box Fixing = 120.6 mm
• Minimum back box depth: 25mm
• Voltage: Mains voltage, 230 V
• Power: Max. 120 W - 10 Lamps Trailing Edge per dimmer knob
• Terminal Capacity: 4 mm2
• Earth Terminal Capacity: 5 mm2
• Product Class 1 Electrical: Face plate must be earthed
• Ambient operating temperature: -5°C- 40°C
• Recommended location: Indoor use only
• Standard/s: BS EN 55014, BS EN 60669-2-1

About the M-Marcus Contractor Victorian Polished Chrome Plain Plate

• The Victorian range is a polished chrome range with Plain plate, raised plate; it lends a clean and simple look which suits almost any interior.
• They are competitively priced and offer the widest choice of classical plate styles with both traditional and contemporary finishes.
• The full Contractor range includes plates in polished chrome, satin chrome, polished brass, and it also has the more elegant Mayfair and Apollo Suites of Satin Brass and Satin Chrome dual finish plates. It offers a wide product profile complying fully with the relevant standards.
• Many of these items are suitable for shallow box installation: of particular benefit to the installer the raised plate design of the contractor range enables plate switches to be used with 17mm plaster depth boxes, and the Power: sockets and other accessories with boxes 25mm deep. Furthermore, the dolly switches, dimmers, shaver sockets, 45A switches, cooker switches, and 50A switches may take deeper boxes - see their individual specifications.
• The Heritage Brass Contractor Victorian range has regular size plates: the single plate is 86mm x 86mm while the double plate is 86mm x 147mm.

Note: All these items in this range are of the same finish colour, but may appear slightly different on the website due to photographic lighting sources and angle. The picture is for information purposes only - please note the title and description of this item for the full details. Please note that the manufacturer reserves the right to alter products without prior notification, and we cannot be held responsible for items that differ slightly from the images shown on our website.

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

• CR974-TED datasheet.pdf (65.34 kB)