Sale Icon
Review Icon
Free Delivery Icon

2 Gang 13A DP Switched Socket with Screwless Terminal Connectors White Plastic MK Logic Plus K2747STWHI Rapid Fix

Model No. K2747STW by: MK Electric
Availability: Normally In Stock

£3.60

Ex. VAT
List price £13.27
You save £9.67!
  • 5 or more:   £3.10 (14% off)
Free Delivery
(over £100+VAT, applies to zones A&B only , £6 +VAT otherwise)
Click & Collect
Order online & collect in store

This is the MK Logic Plus K2747STWHI Rapid Fix 13A DP 2 Gang Double Switched Socket in White Plastic with Screwless Terminal Connectors. 

A 2 gang switchsocket with screwless terminal connectors. Designed for faster and more efficient installation. Correct terminal clamping force maintained over time.

The switchsocket also maintains all the advantageous design features of the MK range of wiring devices.

Suitable for mounting on a 25mm deep box; for extra wiring space a 35mm deep box can be used.

The switchsocket can be quickly installed as a replacement for existing 13A sockets or on a new installation

2 Gang 13A DP Switched Socket with Screwless Terminal Connectors White - Features

  • Screwless terminals utilising CAGE CLAMP® connectors
  • Faster and more efficient to install than traditional screw terminal sockets
  • Colour coded terminal levers to aid installation
  • Moulded ‘on’ indicator flash on plastic switches will not rub off – totally safe
  • Cable strip length indicated on rear of switch socket
  • Printed terminal markings for clearer identification
  • 3mm minimum switch contact gap
  • Double pole switching
  • Additional electrical safety from DP Switch, neutral ‘make first’, ‘break last’ feature
  • Switch contacts with silver contacts on both surfaces for good continuity
  • Installation L & N test probe access

2 Gang 13A DP Switched Socket with Screwless Terminal Connectors White - Specs

  • It is part of the MK Logic Plus Rapid Fix range
  • Colour: White Plastic
  • Current Rating: 13A
  • Dimensions: 86 mm height x 146 mm width
  • Dual Earth: No
  • Fixing Centres: 120.6mm
  • Frequency: 50/60 Hz
  • Material: Moulded Plastic
  • Mounting: for Wall only
  • Max. installation altitude: 2000 metres
  • Mounting Depth: min. 25mm
  • IP rating: IP2XD
  • Number of Gangs: 2 gang switchedsocket
  • Number of Poles: Double Pole
  • Ambient operating temperature: -5°C to +40°C
  • Standards: BS1363 Part 2: 2016+A1:2018
  • Unspsc V18: 39121406
  • Voltage Rating: 230V
  • Weight: 0.259kg
  • Terminal capacity: Live, Neutral & Earth, 3x 2.5mm2 Rigid (solid or stranded), 3x 4.0mm2 Rigid (stranded)

2 Gang 13A DP Switched Socket with Screwless Terminal Connectors White - Installation

This product has screwless terminals ready to receive the cables

  1. Remove the fixing screws clipped to the rear of the product.
  2. Ensure the back box is firmly fixed to the wall.
  3. Each terminal accepts one rigid (solid or stranded) cable up to 4mm2
  4. Strip back the outer sheath and trim the wires to length, allow slack for cable ends to reach the terminals.
  5. Carefully strip back the inner insulation to expose 10mm of conductor, as indicated on rear of socket.
  6. Slide a length of green/yellow sleeving on to the bare circuit protective conductors (earth).
  7. The conductors should now be connected to the respective terminals. Take care to select the cable with the appropriate sleeve colour for each terminal. Insert one cable to each terminal only, by lifting the terminal lever. Close each lever independently before moving to the next cable. Ensure all cables are tightly clamped.
  8. Please note. In new buildings constructed in UK after April 2004, and in the EU, the colour codes are: BROWN = terminal marked L, BLUE = terminal marked N, GREEN/YELLOW = terminal marked.
  9. Colour codes prior to April 2004 are RED = Live, BLACK = Neutral, GREEN/YELLOW = Circuit Protective Conductors (earth).
  10. Green/yellow sleeved wire must be connected between the socket earth terminal and the back box earth terminal.
  11.  Carefully push the wired socket back into the back box, ensuring the cables are not trapped or pinched.
  12. Using the fixing screws provided, mount the socket onto the back box. Do not overtighten, so as to prevent damage and distortion to the frontplate. Adjust so the frontplate is square on the wall.
Switches & Sockets Specific
Amp 13
Back Box Depth 25mm
Brand MK
Finish White
Gang 2
Insert No Insert
Plate Plastic
Plate Dimensions 86mm x 146mm
Style White Moulded
Type Socket

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

Ask a question

Note: HTML is not translated!

Shipping

Sparks Direct delivers via courier to the UK only; the standard delivery charge is £6 + VAT for all orders under £100 + VAT. If your order is over £120, you get free delivery (unless there's a special delivery charge for the items you wish to order or you're in shipping zone C or D). Full details for shipping charges can be found via Terms and Conditions.

If the items you order are in stock and the order is placed before 1.00pm, delivery can be made within 1-2 working days. If the items are not in stock, we will inform you via email how long it will take or ask for your confirmation if there's a long lead time.

Returns

We offer 30-day returns for unwanted items - please email us to request a returns number which will need to be quoted when the items are returned. For faulty items or items damaged in transit, please advise via email, and an appropriate returns number will be provided. Full details concerning returns and refunds can be found via our Terms and Conditions.