Touch Activated Time Lag Switch, 10sec - 20min Electronic Time Delay Switch / Timer CP Electronics KH2

Model No. KH2 by: CP Electronics.
£34.60 Ex. VAT
This item requires:

Free delivery
(over £100 +VAT, applies to zone A and B only, £6 +VAT otherwise)

Usually 3-5 days

Click & Collect

Order online & collect in store

Our customers love us - read their reviews

Wishlist Ask a question Compare

The CP Electronics KH2 time lag switch is an quick and effective way to ensure maximum energy-efficiency for lighting applications. 

Pressing the touchpad turns on the light, which will then turn off automatically after a preset time period has elapsed (the time period can be adjusted from 10 seconds to 20 minutes).

The KH2 electronic time lag switch touch activated boasts a robust timer with tamper resistant touch pad operation. It is easy to operate and has an adjustable timing period. 

These units do not require a neutral connection, therefore they can be used to replace an existing light switch. The duration of the time delay is set by a thumbwheel on the reverse of the unit.

KH2 Touch Activated Time Lag Switch - Features

  • Robust timer with tamper resistant touch pad operation
  • Easy to operate, with a fully adjustable timing period
  • You can adjust the time delay settings via pots.
  • It is a 2 wire no-neutral switch, suitable for lighting. 
  • It comes with a 5 year manufacturer's warranty. 
  • Electronic time lag switch touch activated

CP Electronics KH2 Time Lag Switch Touch Activated - Technical Specs

  • Load: 10A of lighting including incandescent, fluorescent, compact fluorescent, low voltage (switch primary of transformer). 
  • Time Delay: approx 10sec - 20mins
  • Part of the CP Electronics Green-i range
  • Fluorescent and compact fluorescent fittings with “switch start” ballasts - 10 ballasts maximum. Power factor correction capacitors must be fitted.
  • LED lamps: this time lag switch is NOT suitable for LEDs. 
  • Supply voltage: 220-240 Volts AC 50 Hz
  • Dimensions: 86mm width, 86mm length, 17mm depth, 19mm projection from wall
  • Timeout period: 20 seconds to 20 minutes (approximate)
  • Fixing method: Surface fixing 25mm deep plastic surface mount moulded box.
  • Flush fixing: 25mm steel wall box or 32mm deep cavity wall box.
  • Terminal capacity: 1.5mm2
  • Material: Flame retardant ABS
  • Rating: Class 2
  • Temperature: -10°C to 35°C
  • Conformity: EMC-2004/108/EC, LVD-2006/95/EC, CE Mark
  • Not suitable for switching contactors, SON lighting, and heating or ventilation loads. Not suitable for LED lighting. 
  • Note: it is not suitable for use with LED lamps. 
Switches & Sockets Specific
Back Box Depth 25mm
Brand CP Electronics
Finish White
Gang 1
Insert No Insert
Plate Plastic
Plate Dimensions 86mm x 86mm
Style Moulded White
Type Switch

 

Follow us for exclusive offers and tips about lighting, switches and sockets

Get in touch

Telephone 020 7263 8007

Fax 020 7272 3007

Sparks Electrical Wholesalers Ltd, 659-661 Holloway Road, Archway, London, N19 5SE, United Kingdom
Registered in England. Company No. 2238028. VAT Reg No: GB 505 6899 17. Copyright © 2003-2020 SparksDirect

Award Winning Ecommerce from Cyber-Duck