Varilight KQP221W V-Com 1 Gang 2 Way 30-220W LED Dimmer and Push ON/OFF Switch White Plastic

This is the White Varilight KQP221W 1 Gang 2-Way push ON/OFF V-Com LED Dimmer for 30W - 220W max. load (it takes max. 30 LED lamps). It is primarily targeted at commercial installations where a large number of dimmable LED lamps are used, but it is also excellent for the domestic environment.  V-Com dimmers are leading-edge and suitable for most types of lighting, including many dimmable LEDs. To optimise the dimming range for LED lighting in particular the minimum brightness setting of the dimmer can be adjusted. 

Varilight KQP221W 1 Gang 2 Way 220W V-Com LED Dimmer

• 1-Gang 2-Way Push-on Push-off LED Dimmer 1 x 30-220W
• VARILIGHT V-Com intelligent programmable dimmerswitch
• Rotary LED dimmer with push on/off switch taking max. 220W LED dimmable lamps. 
• Soft start for improving the lamp life
• Adjustable minimum brightness
• Thermal protection
• Finish: white plastic (white PVC)
• Suitable for most type of loads
• Suitable for: Most dimmable LEDs [see “Dimmable LEDs” box], Good quality dimmable low voltage transformers [see “Transformers" box], GU10 or similar good quality mains halogen bulbs, Mains voltage incandescent GLS or candle-shaped bulbs. 
• Not suitable for fluorescent bulbs and tubes, or for electric motors. 
• Part of the Varilight V-Com Commercial Series LED dimmers. 
• Dimensions: 85 x 85mm, single face plate
• Back box: fits in a 25mm deep wall box
• Can also dim ceiling LED panels.
• This product complies with European Safety Regulations (IEC 669-2-1 or BSEN 60669-2-1) when used in lighting circuits containing MCBs (miniature circuit breakers). These can be rated at 6A, 10A or 16A (preferably 6A for lighting circuits).Your guarantee is not affected if you have an older lighting circuit protected by fuse wire links. 

Note: picture is informative