Airflow QuietAir 5 inch (120mm) Axial Extractor Fan with Adjustable Humidity and Timer Quiet Ventilation in Bathroom, Toilet, and Kitchen Airflow 9041499

Airflow QuietAir QT120HT 120mm Bathroom Fan with Adjustable Humidity and Timer - Features

• The QuietAir range of fans combine contemporary design with ultra low noise levels and outstanding energy efficiency.
• The Airflow QT120HT has a high efficiency impeller for ducted installation up to 12m long with up to 10x 90º bends.
• It has an integral flow straightener and back draught flap
• The two speed fan is selectable on installation. The second speed may be used independently
• The Airflow QT120T has a wipe clean clip on cover for ease of cleaning
• The fan complies with the latest Building Regulations Approved Document F.
• A stylish and efficient fan so quiet that you can hear a pin drop
• Application: For use in toilets, en-suites, bathrooms, small rooms, utility rooms

Airflow QuietAir QT120HT 5 inch Ventilation Fan with Humidity and Timer - Main Features

• It was awarded QuietMark 2014 for kitchen category by Noise Abatement Society
• It is a quiet fan - from only 32 dB(A)
• Delay start for two minutes avoids unnecessary use (especially at night), and saves energy
• Low power consumption: from only 10 watts
• It has two speed options, 150 m3/hr and 170 m3/hr
• It comes with a humidity sensor, which can be set between 60 - 90% RH
• It comes with an adjustable overrun timer
• High efficiency impeller delivers up to 120m3/hr through long lengths of rigid ducting, including 90 degree bends
• Use in wet zone 1 when protected by an RCD and installed in accordance with latest IEE wiring regulations
• Integral flow straightener and back draught flap
• Low specific fan power for SAP assessments
• Clip-on cover for ease of cleaning
• Operated by a range of control options including basic switching, timer, humidity and motion sensor control.
• Room refresh (interval timer) enables automatic extraction at pre-set times if required.
• Innovative room refresh option (interval timer) programmable for automatic long term routine ventilation
• Complies with latest 2010 Building Regulations Approved Document F
• Model: Airflow 9041498
• Airflow: 150/170 m3/hr, 41.6/47.2 l/sec
• Airflow: 31Pa @ 120 m3/hr, 33.3 l/sec
• Axial high efficiency impeller
• Long life ball-bearing motor with 40,000 hours life
• Mounting: ideal for wall/ceiling mounting
• Sound pressure: 32/36 dB(A) @ 3m
• Adjustable timer (minutes): 6, 10, 15, 21
• Power: 10/13 watts
• Low SFP (Specific fan power): 0.24 w/l/s*
• Voltage: 230/1/50-60Hz
• IP Rating: IP45 rated
• Max. ambient temperature 40 degree
• Interval times, auto start: 0, 8, 12, 24 hours

Need more detailed specs?

• QT120HT-data.pdf (510.84 kB)
• QT120HT-instr.pdf (1.93 MB)