Sale Icon
Review Icon
Free Delivery Icon

Apollo Series XP95 Optical Smoke Detector (A2S) Analogue Addressable, Apollo 55000-600APO

Model No. FX443 by: Fike
Availability: Usually 2 - 3 Days

£29.79

Ex. VAT
List price £49.65
You save £19.86!

This item requires:

Free Delivery
(over £100+VAT, applies to zones A&B only , £6 +VAT otherwise)
Click & Collect
Order online & collect in store

This is the Apollo 55000-600APO, a XP95 Optical Smoke Detector uses the light scatter principle to quickly and effectively detect a range of slow burning and smouldering fires. 

Note: this item is non-returnable; we are not able to take it back as "unwanted". Please make sure that this is the exact item you require before ordering.

Specifications are typical at 24 V, 25°C and 50% RH unless otherwise stated. The XP95 range of analogue addressable fire detectors uses tried and trusted technology to give the best performance, and has unique features that benefit the installer and the end user. It is suitable for medium-to-large applications with simple installation requirements.

Each Apollo Series XP95 device responds to interrogation and command from central control equipment. It communicates to the panel information on status, command bits, type, location, and other information that allows an alarm to be raised even when the device is not itself being interrogated. Message error checking is also provided. The devices are compatible with Discovery® systems and control equipment to aid maintenance, extension and upgrade of existing systems.

A unique, patented XPERT card provides simple, user friendly and accurate identification of detector location whereby a coded card, inserted in the base, is read by any detector once it is plugged in. All the electronic components are in the detector but the location information is held in the base. The address card simplifies and speeds up installation and commissioning. Addressing errors during maintenance and service are eliminated.

Note: this is the heat detector only; the mounting base needs to be ordered separately.

Apollo Series XP95 Optical Smoke Detector (A2S) - Features

  • Reliable fire detection in areas with a wide temperature range from -20°C to +60°C
  • Well suited to escape routes
  • Responds well to slow burning, smouldering fires
  • Unaffected by wind and atmospheric pressure
  • Insect resistant screen
  • Detection principle: Photo-electric detection of light scattered in a forward direction by smoke particles
  • Chamber configuration: Horizontal optical bench housing an infrared emitter and sensor arranged radially to detect scattered light
  • Sensor: Silicon PIN photo-diode
  • Apollo Series XP95 Optical Smoke Detector (A2S) - Specs

General

  • Warranty: 10 year
  • Applications: Escape routes, Hotels, Offices, Restaurants, Retail, Medium to large buildings, Bedrooms
  • Fire Type: Slow burning, smouldering fires

Mechanical

  • Colour: White
  • Sensor configuration: Horizontal optical bench housing infra-red emitter and sensor, arranged radially to detect forward scattered light.
  • Weight: 105g
  • Materials housing: Polycarbonate
  • Materials terminals: Nickel plated stainless steel
  • Product length: 42mm
  • Product diameter: 100mm
  • Detection principle: Photo-electric light scattering.
  • Product length: 1.65in
  • Product diameter: 3.94in

Conformance

  • Standards: EN 54-7
  • Approvals: CPR, KRS, ABS, LPCB 

Performance

  • Analogue value nominal: 25
  • Analogue value (- tolerance): 7
  • Analogue value (+ tolerance): 7
  • Analogue value: 25 +7/-7
  • Alarm level analogue value: 55
  • Chamber type: Chevron

Electrical

  • Protocol voltage: 5 to 9V peak to peak
  • Protocol voltage (max): 9V
  • Protocol voltage (min): 5V
  • Power-up surge current: 1mA
  • Maximum power-up time: 4 seconds
  • Status indicator - Alarm: Red
  • Status indicator - Fault: Off
  • Quiescent current: 340μA
  • Supply voltage (max): 28V dc
  • Supply voltage (min): 17V dc
  • Supply voltage (Vmin-Vmax): 17 to 28V dc
  • Terminal functions L2: +L2 Loop in & out positive, double terminal
  • Terminal functions L1 in: -L1 in Loop in & out, double terminal
  • Terminal functions +R: +R Remote indicator positive connection
  • Terminal functions -R: -R Remote indicator negative connection
  • Polarity: L1 & L2 are polarity insensitive
  • Battery powered: No
  • Sampling frequency: Once per second

Environmental

  • Humidity (max): 95% RH
  • Humidity (min): 0% RH
  • Humidity Note: no condensation or icing
  • Humidity: 0% to 95% (no condensation or icing)
  • Operating temperature: -20 to 60°C
  • Operating temperature (max): 60°C
  • Operating temperature (min): -20°C
  • Storage temperature (max): 80°C
  • Storage temperature (min): -30°C
  • Storage temperature: -30 to 80°C
  • Effect of wind speed: None
  • Operating temperature: -4 to 140°F
  • Operating temperature (max): 140°F
  • Operating temperature (min): -4°F

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

Ask a question

Note: HTML is not translated!

Shipping

Sparks Direct delivers via courier to the UK only; the standard delivery charge is £6 + VAT for all orders under £100 + VAT. If your order is over £120, you get free delivery (unless there's a special delivery charge for the items you wish to order or you're in shipping zone C or D). Full details for shipping charges can be found via Terms and Conditions.

If the items you order are in stock and the order is placed before 1.00pm, delivery can be made within 1-2 working days. If the items are not in stock, we will inform you via email how long it will take or ask for your confirmation if there's a long lead time.

Returns

We offer 30-day returns for unwanted items - please email us to request a returns number which will need to be quoted when the items are returned. For faulty items or items damaged in transit, please advise via email, and an appropriate returns number will be provided. Full details concerning returns and refunds can be found via our Terms and Conditions.