Wisebox Kit 4 Channel Receiver with Intense Switch and Remote, Wireless ON/OFF and PIR / Timelag Lighting Controls Kit

£135.00 Ex. VAT
List price £150.00 You save £15.00!
This item requires:

Free delivery
(over £100 +VAT, applies to zone A and B only, £6 +VAT otherwise)

Usually 2 - 3 Days

Click & Collect

Order online & collect in store

Our customers love us - read their reviews

Wishlist Ask a question Compare

This is the WiseBox Kit (Version 2), composed of a wise box receiver, an Intense switch, and a remote control for switching on/off. It is an updated version of the original WISEBOX kit, featuring 4 PIR timer dials for each circuit (which allows up to 16 PIRs to be connected). It also includes a 4-button keyfob and a 4 button Intense wall switch. 

Note: This item is non-returnable; due to the fact that it is an electronic product, we cannot take it back for a refund as "unwanted".

WiseBox Wireless Lighting Control Switch - features

  • This wisebox can remotely control your lights, water features, electric gates, electric shutters, etc. You simply have to program it, place the indoor wireless switch in a suitable location, and installation is complete: you can simply enjoy switching your circuits from anywhere in your home or garden with the included remote control. 
  • The receiver has a 4 x 10A circuits with a max. 20A. 
  • Each circuit on the WiseBox is fused individually with a 10A fuse (to protect all the circuits).
  • The wisebox can achieve a 150m range with a clear line of sight. 
  • The keyfob (the remote control) and the wal switch (a wise switch) included in the kit have each four buttons; once you program the button of your choice to link with a channel, that button will switch the channels circuit ON or OFF. 
  • You can add additional switches and remotes to a WiseBox, up to a max. of 16. 

How to Program the Wisebox

There are three main options for programming the WiseBox kit:

  1. Single Button ON and OFF - if you program it this way, it will create an ON and OFF from a single button on a wireless switch / remote.
  2. Dual Button ON and OFF - you can assign your ON and OFF to two separate buttons. 
  3. PIR / Timelag function - when programmed this way, it only sends an ON signal, which is then switched OFF by a pre-set countdown timer. If you program to a PIR, then the PIR will reset itself to the preset time every time the sensor is triggered. If you program it to a switch or remote, the countdown will switch OFF when it reaches 0 seconds. 

Wisebox Kit - Technical Specifications

  • Detection Range: 200m
  • IP Rating: IP54 rated (needs to be sheltered, preferrably indoors)
  • Dimensions: Depth 80mm, Height 184mm, Width 200mm
  • Rating: 20A
  • Maximum Amps / Circuit: 10A
  • Minimum Wattage per Circuit: 1W
  • Voltage: mains voltage 240V
  • Wise Box Receiver, Intense Switch & Remote
  • Relay out: 10A 230V ~ 4000W total maximum load (the sum of the loads of the 4 outputs can't exceed 4000W)
  • Reception frequency: 868.3 MHz
  • Intermediate frequency: 10.7 MHz
  • Sensitivity (finely tuned signal): 1 µV
  • Operating temperature range: -20° — +50°C


Follow us for exclusive offers and tips about lighting, switches and sockets

Get in touch

Telephone 020 7263 8007

Fax 020 7272 3007

Sparks Electrical Wholesalers Ltd, 659-661 Holloway Road, Archway, London, N19 5SE, United Kingdom
Registered in England. Company No. 2238028. VAT Reg No: GB 505 6899 17. Copyright © 2003-2021 SparksDirect

Award Winning Ecommerce from Cyber-Duck