Load Resistor for Eliminating Instability and Flicker when Dimming Non-Resistive Loads Danlers RESLOADE

The Danlers RESLOADE can be used to try to eliminate lamp instability and flicker when dimming non-resistive loads such as mains directly dimmable LED lamps or dimmable transformers.

Load Resistor for Eliminating Instability and Flicker - Features

• DANLERS RESLOADE, resistive load, can be used to try to eliminate lamp instability and flicker when dimming non-resistive loads such as mains directly dimmable LED lamps, compact fluorescent lamps or dimmable transformers. The RESLOADE is designed for DANLERS Grid trailing edge dimmers (DQDGD) when dimming LED lamps although it may be suitable for use with other manufacturers dimmers when dimming LED 
• lamps. Inappropriate use of the RESLOADE may invalidate the warranty.
• For direct mains dimmable lamps the RESLOADE is connected at a suitable light fitting, in parallel across the load, between the dimmed variable live and neutral. 
• For mains dimmable transformers the RESLOADE is connected across the primary (variable mains input) side of the transformer. 
• The RESLOADE is designed to be placed into the ceiling void and can be passed through a 63mm diameter cutout, the typical size for down lighters, as shown below.
• The RESLOADE has an effective load of 10W and an operating temperature of approximately 40°C above ambient. It should be installed where air flow is not restricted. It should not be covered by insulating materials or positioned near any heat sources or heat sensitive objects.
• The RESLOADE is designed for Danlers Grid trailing edge dimmers (DQDGD) when dimming LED lamps and any other use of this product will invalidate our warrantee.
• For direct mains dimmable lamps the RESLOADE is connected at a suitable light fitting, in parallel across the load, between the dimmed variable live and neutral.
• For mains dimmable transformers the RESLOADE is connected across the primary (variable mains input) side of the transformer.
• The RESLOADE is designed to be placed into the ceiling void and can be passed through a 63mm diameter cutout, the typical size for down lighters.
• The RESLOADE has an effective load of 10W and an operating temperature of approximately 40°C above ambient. It should be installed where air flow is not restricted. 
• It should not be covered by insulating materials or positioned near any heat sources or heat sensitive objects.
• Product code: RESLOADE
• Dimensions: 130mm length x 60mm diameter x 60mm
• Manufacturer: Danlers

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

• RESLOADE-data.pdf (711.71 kB)