Wago 2104-1201 2-Conductor DIN-Rail Terminal Block Lever + Push-in CAGE CLAMP 4mm2 32A in Grey

This is the Wago 2104-1201 DIN-Rail Terminal Block Push-in + Lever 2-Conductor in Grey 4mm2. It is a 2-conductor through terminal block; with lever and Push-in CAGE CLAMP®; 4 mm²; with test port; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 4,00 mm²; gray

Wago 2104-1201 DIN-Rail Terminal Block Push-in + Lever - Specs

• Ratings per: IEC/EN
• Ratings per: IEC/EN 60947-7-1
• Nominal voltage (III/3): 800V
• Rated impulse voltage (III/3): 8kV
• Rated current: 32A
• Legend (ratings) (III / 3): Overvoltage category III / Pollution degree 3
• Ratings per IEC/EN: 2
• Rated current 2: 40A
• Approvals per UL: 1059
• Rated voltage UL (Use Group B): 600V
• Rated current UL (Use Group B): 30A
• Rated voltage UL (Use Group C): 600V
• Rated current UL (Use Group C): 30A
• Approvals per: CSA 22.2 No 158
• Rated voltage CSA (Use Group B): 600V
• Rated current CSA (Use Group B): 30A
• Rated voltage CSA (Use Group C): 600V
• Rated current CSA (Use Group C): 30A
• Ratings per: ATEX: PTB 20 ATEX 1006 U / IECEx: PTB 20.0012U (Ex eb IIC Gb)
• Rated voltage EN (Ex e II): 550V
• Rated current (Ex e II): 30A
• Power loss, per pole (potential): 1.362W
• Rated current IN for specified power loss: 32A
• Resistance value for specified, current-dependent power loss: 0.001Ω
• Connection points: 2
• Total number of potentials: 1
• Number of levels: 1
• Number of jumper slots: 2
• Connection: 1
• Connection technology: Push-in CAGE CLAMP®
• Actuation type: Lever
• Connectable conductor materials: Copper
• Nominal cross-section: 4 mm²
• Solid conductor: 0.5 … 6 mm² / 20 … 10 AWG
• Solid conductor; push-in termination: 1.5 … 6 mm² / 14 … 10 AWG
• Fine-stranded conductor: 0.5 … 6 mm² / 20 … 10 AWG
• Fine-stranded conductor; with insulated ferrule: 0.5 … 4 mm² / 20 … 12 AWG
• Fine-stranded conductor; with ferrule; push-in termination: 1.5 … 4 mm² / 18 … 12 AWG
• Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
• Strip length: 11 … 13 mm / 0.43 … 0.51 inches
• Wiring direction: Front-entry wiring
• Connection: 2
• Actuation type 2: Operating tool
• Width: 6.2 mm / 0.244 inches
• Height: 70 mm / 2.756 inches
• Depth from upper-edge of DIN-rail: 32.9 mm / 1.295 inches
• Mounting type: DIN-35 rail
• Marking level: Center/side marking
• Color: gray
• Material group: I
• Insulation material: Polyamide (PA66)
• Flammability class per UL94: V0
• Fire load: 0.186MJ
• Weight: 10.3g
• Processing temperature: -35 … +85 °C
• Continuous operating temperature: -60 … +105 °C

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

• 21041201 datasheet.pdf (192.45 kB)