The Airflow iCON Range of extractor fans
The choice of three aesthetically designed fans in the iCON range means you can fit the perfect size to perform effectively for the size of room and the application. The low profile iCON 15 axial fan is sleek and slim. The iCON 30 and iCON 60 mixed centrifugal/axial flow fan technology makes them not only highly compact and efficient but also extremely quiet in operation and suitable for use with longer runs of ducting.A stylish, slim and unobtrusive new range of fans for toilet, bathroom and kitchens with a unique iris shutter and a choice of colours too! The choice of three aesthetically designed fans in the iCON range means you can fit the perfect size to perform effectively for the size of room and the application. The low profile iCON 15 axial fan is sleek and slim. The iCON 30 and iCON 60 mixed centrifugal/axial flow fan technology makes them not only highly compact and efficient but also extremely quiet in operation and suitable for use with longer runs of ducting.
Read below more about the Low Energy Airflow iCON fans, some of the Technical specs, the Airflow iCON accesories, and some installation advices.
The 12V DC low energy fans – Airflow iCON 15S and Airflow iCON 30S
The Airflow iCON 12volt SELV low watt fans with brushless DC motors offer significantly reduced energy consumption compared with standard AC motors. Fitted with ball bearing motors for extra long life, each one is supplied with a 230V AC transformer. Interchangeable fan control modules are available. Both fans are SELV (safety extra low voltage) compliant with IEE wiring regulations for wet zones in bathrooms.The continuous ventilation fans iCON 15CV and iCON 30CV provide quiet, adjustable continuous background ventilation at a minimum high rate of 8 l/sec and 13 l/sec respectively with a choice of control options to boost performance to maximum air flow.
iCON 15S and iCON 30S - Energy saving and extra safe!
iCON 12 volt SELV low watt fans with brushless DC motors offer significantly reduced energy consumption compared with standard AC motors. They are also better looking, quieter and easier to install than many other fans. Fitted with ball bearing motors for extra long life, each model is supplied with a 230v AC to 12VDC transformer.The Airflow iCON SELV Range
Aesthetically designed and extremely efficient, the iCON range of low watt DC fans provides economy in use with a long working life and SELV protection. The iCON 15S axial fan is sleek and slim, while iCON 30S mixed centrifugal/axial flow technology makes it highly compact and also quiet in operation.
Airflow iCON 15S - 12v DC / SELV Axial fan
- The Airflow iCON 15S is ideal in toilets and wet zones in en-suites, shower rooms and bathrooms.
- Recessed into the wall or ceiling, it is stylish and unobtrusive, even in the smallest space.
- Supplied with AC/DC transformer.
- Housing IP rating: IPX4; Fan Size:197 x 89mm.
- Ductable Air flow: Up to 4m 70m3/hr.
- Buy online the Airflow iCON15S.
Airflow iCON 30S - 12 DC / SELV Axial Fan
- The Airflow iCON 30S is quiet, powerful and designed for recessed or surface mounting in walls or ceilings in wet zones in larger toilets, bathrooms and utility rooms.
- Supplied with AC/DC transformer.
- Housing IP rating: IPX4; Fan Size: 225x141mm.
- Ductable Air flow: Over 9m 111m3/hr.
- Buy online the Airflow iCON30S.
Accessories and Technical Specs - Airflow iCON
Airflow iCON fans - Accessories
iCON 15S and iCON 30S can be ducted through standard 100mm (4”) rigid, flexible or flat ducting. Airflow supplies a comprehensive range of ducting, accessories and controllers to complement an installation and can advise on specification of compatible ducting and grills to meet Good Practice Guidance.
Accessories
- High rise cowl kit;
- Circular grilles;
- Steel flat ducting;
- Airflex ducting;
- Door switch;
- Wall grilles;
- Wall grilles with spigots;
- Airflat ducting;
- Speed controller;
- Roof cowl;
- Cavity wall kit.
The Installation of the Airflow ICON ventilation fans
- iCON has been designed with simplicity in mind. A quick, core drilled hole enables immediate fixing of iCON.
- The twist on/off cover requires only a single side entry fixing screw.
- Cantilever fixing lugs enable recessed installation on uneven surfaces.
- iCON 30 and iCON 60 are also supplied with a narrow contour skirt for surface mounting if preferred.
- The ‘snap-in’ module is quick to fit and wire giving the installer a choice of controls on-site.
