BG Electrical 763-01 Batten Holder (T2) Enclosed and Tails in White taking BC/B22 Lamps
£3.87
Ex. VAT- 10 or more: £3.13 (19% off)
(over £100+VAT, applies to zones A&B only , £6 +VAT otherwise)
Order online & collect in store
This is the BG Electrical 763-01 Batten Holder (T2) Enclosed and Tails in White taking BC Lamps available at Sparks Electrical Wholesalers for the best price.
This high-quality enclosed batten holder from British General is T2-rated and supplied with heat-resistant wire and is suitable for use with for B22 Bayonet cap light bulbs.
The wiring aperture in the base has an extra knockout for ease of wiring and incorporates L, N and Loop-in terminals with 8 individual cable entries and captive screws.
The base can be removed without removing the HO skirt and has alternative fixing holes for off-centre mounting and ease of installation.
The HO skirt is ideal for use in bathrooms and other rooms where moisture is present as it prevents the metal cap of the lamp from being touched in damp situations.
BG Electrical 763-01 Batten Holder (T2) Enclosed and Tails - Features
- Easy to install, supplied with fixing screws and installation instructions
- Wiring aperture in base with extra knockout for ease of wiring
- Base incorporates L, N and Loop-in terminals with 8 individual cable entries
- large capacity Earth terminal with locking terminal screw.
- Wired with heat-resistant wire
- Base cover can be removed without removing HO skirt
- Captive screws prevent screw loss
- 3 Terminal, T2 rated
- HO skirt is ideal for use in damp rooms such as bathrooms and kitchens as it prevents the metal cap of the lamp being touched in damp situations
- For B22 bayonet cap lamps
- Base molding produced in clear polycarbonate
- Cover mouldings produced in satin finish urea
- The base incorporates L, N and Loop-in terminals with 8 individual cable entries and captive screws
- Large capacity Earth terminal with locking terminal screw
- Wiring aperture in base with extra knockout for ease of wiring
- Alternative fixing holes allow for off-centre mounting
- Lampholder T2 rated
- 2 x 0.75mm² heat resistant wire supplied prewired to lamp holder
BG Electrical 763-01 Batten Holder (T2) Enclosed and Tails - Specs
- Dimensions: 68mm height/depth, 85mm diameter
- Standard(s): BS 67, BS EN 61184, BS6141
- Rating: 6 Amp 250V~, 150 Watt max
- Terminal Capacity: 4 x 1.0mm² 3 x 1.5mm² 1 x 2.5mm²
- Covered by RoHS directive: Yes
- Covered by WEEE directive: No
- Size: 85mm dia x 76mm
- Fixing Centres: 50.8 mm
Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.
