Arco Trimless Fire Rated Fixed IP20 GU10 Downlight in White with White Baffle FossLED FD05PT-00 68mm Cutout

This is the Arco Trimless Fire Rated Fixed IP20 rated GU10 Downlight in White with White Baffle FossLED FD05PT-00 68mm Cutout available at Sparks Electrical Wholesalers for the best price. 

Type: ARCO Trimless Fire Rated GU10 Downlight in White with White Baffle

The FossLED Arco GU10 Trimless presents a classic architectural design that naturally elevates the style of any environment it sits in. Pressed in steel and composed of fire rated glass allows this unit to have a very low profile, making it quick and easy to install, whilst offering improved ventilation to your LED bulb and in turn improving its lifespan.

Plastered-in downlight: to be plastered in before the final skim.

Arco Trimless Fire Rated Fixed IP20 GU10 Downlight in White - Specs

• Light Source: LED GU10 (not included)
• Cut Out: 68mm
• Diameter: 65mm
• Height: 28mm
• Plaster In frame: 102mm x 75mm
• Fire rating: 30, 60 and 90 Minutes Fire Rated
• IP rating: IP20 Rated
• Insulation Coverable when an Insulation Guard is installed
• 230V: Mains Voltage powered
• Dimming: Mains Dimmable when a suitable lamp is installed
• Light Source: LED GU10
• Wattage: 7W Max
• Lamp included: No, the LED lamp needs to be ordered separately
• Finish: RAL 9003, white
• Class 2 electrical rated
• Product Reference: FossLED FD05PT-00

Compatible Insulation Bracket: IC02, to be ordered separately. The Insulation Guard allows this product to be covered by thermal and acoustic insulation e.g. loft insulation. Not suitable for blown insulation. Please ensure a max wattage of 7W when covering with insulation and utilising the insulation bracket.

Arco Trimless Fire Rated Fixed IP65 rated GU10 Downlight in White - Features

• fossLED open construction fire rated glass fixtures feature a low profile for installation versatility and good air circulation for improved lamp lifetime.
• Fire Rated to 30 minutes, 60 minutes and 90 minutes when installed in ceilings of approved construction to BS 476: Part 21:1987.
• IP20 rating, dust resistant only, no resistance to moisture or water.
• This fitting is compliant to Building regulations Part B and Part L.
• (When used in conjunction with high efficiency LED lamps).
• This product must be installed by a qualified electrician in accordance with instructions provided and in compliance with recognised electrical and safety regulations relevant to the country it is being installed.
• This product must not be used with non-LED lamps and installed with a max lamp wattage of 7W.
• This product is for indoor use only.
• Minimum clearance is 50mm above the installed fitting and should NOT be installed within 200mm of any joist.
• This light fitting should be connected to a circuit with a 30mA RCD when fitted in a room containing a bath or shower.
• Avoid the installation of cables in locations that would cause a hazard. Position cables away from areas where there may be at risk of them being trapped, damaged or cut.

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

• FD05PT00 manual.pdf (729.88 kB)
• FD05PT00 datasheet.pdf (409.07 kB)