13W 838mm Linkable LED Striplight CCT Adjustable 3000K/4000K/6500K IP20 Switched with 2m Cord and Mounting Brackets, Knightsbridge UCLCT9

This is the ML Accessories Knightsbridge UCLCT9 230V mains voltage 838mm long 13W LED Linkable Striplight CCT Adjustable (3000K, 1055lm/ 4000K, 1055lm/ 6500K, 1025lm).

It has a colour temperature adjustable and it offers 13W; it is ideal for kitchens, under cabinet, cove lighting. It comes complete with an inline coupler to be linked with other similar LED strips, and it can also be connected via link leads (sold separately).

The innovative circuit allows units to be linked together yet switched separately. The built-in memory facility ensures that the last setting and colour temperature is remembered, without the need to reset. 

• Linkable LED strip light complete with 2m power cord, coupler, and fixing clips. 
• Mounting: it can be mounted horizontally as well as vertically. 
• It can be linked with other LED strips, max. 20 fittings can be connected together.
• CCT adjustable: you can choose the colour temperature - 3000K, 1055lm/ 4000K, 1055lm/ 6500K, 1025lm

13W 838mm Linkable LED Striplight CCT Adjustable - Specs

• Description: it is a 230V LED CCT Adjustable Linkable Striplight complete with 2m power cord and mounting brackets
• Weight: 0.23kg
• Dimensions: 838mm length, 22.8mm width, 36mm projection
• Wattage: 13W
• Lumens: 3000K - 1055lm +/-5%; 4000K - 1055lm +/-5%; 6500K - 1025lm +/-5%
• Efficacy: 3000K - 81lm/W; 4000K - 81lm/W; 6500K - 79lm/W
• CCT: adjustable, 3000K / 4000K / 6500K
• LED colour: Warm White / Cool White / Daylight
• CRI >80
• Circuit wattage: 12.43W
• Running current: 0.099A
• Power factor: >0.5
• Lifespan: 30.000h
• Input voltage: mains 230V 50Hz
• Class II electrical rated
• IP rating: IP20 rated
• Material: polycarbonate with opal diffuser
• Finish: white
• No. of LEDs: 204
• Dimming: non-dimmable
• Switch: it has a switch on the body of the fitting
• Manufactured in accordance with: BS EN 60598
• EAN: 5055832999621
• Manufacturer product code: Knightsbridge UCLCT13

Changing the Colour Temperature

• According to the manufacturer's instructions, the colour temperature of an individual fitting can be changed by means of the switch located on the fitting.
• The colour temperature of a group of fittings can be changed by means of a wall switch.
• To change colour temperature, switch off and on again within one second. The colour will change each time this is done
• To retain colour temperature switch off for longer than three seconds before switching on again. The colour temperature will be retained
• If any of the luminaires are switched off and on again for an interval between one and three seconds, they may go out of synchronisation with each other. If this happens the switches located on the individual fittings must be used to resynchronise them
• The switch on each individual fitting will only affect the colour temperature of that fitting, not of those connected after it

Safety and General Instructions

• This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations. If in any doubt, consult a qualified electrician
• Please isolate mains prior to installation or maintenance
• Check the total load on the circuit (including when this luminaire is fitted) does not exceed the rating of the circuit cable, fuse or circuit breaker
• Please note the IP (Ingress Protection) rating of this luminaire when deciding the location for installation
• This product is Class II double insulated
• This series is IP20 rated
• The LED lamps fitted in this product are non-replaceable. The unit should be recycled in the correct manner when it reaches the end of its life. Check local authorities for where facilities exist.
• Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage the product.
• This product is non-dimmable.

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

• USLED83W-data.pdf (183.37 kB)
• USLED83W-instr.pdf (576.69 kB)