Load Resistor for Eliminating Instability and Flicker when Dimming Non-Resistive Loads Danlers RESLOADE
£30.50
Ex. VAT
(over £100+VAT, applies to zones A&B only , £6 +VAT otherwise)
Order online & collect in store
The Danlers RESLOADE can be used to try to eliminate lamp instability and flicker when dimming non-resistive loads such as mains directly dimmable LED lamps or dimmable transformers.
Load Resistor for Eliminating Instability and Flicker - Features
- DANLERS RESLOADE, resistive load, can be used to try to eliminate lamp instability and flicker when dimming non-resistive loads such as mains directly dimmable LED lamps, compact fluorescent lamps or dimmable transformers. The RESLOADE is designed for DANLERS Grid trailing edge dimmers (DQDGD) when dimming LED lamps although it may be suitable for use with other manufacturers dimmers when dimming LED
- lamps. Inappropriate use of the RESLOADE may invalidate the warranty.
- For direct mains dimmable lamps the RESLOADE is connected at a suitable light fitting, in parallel across the load, between the dimmed variable live and neutral.
- For mains dimmable transformers the RESLOADE is connected across the primary (variable mains input) side of the transformer.
- The RESLOADE is designed to be placed into the ceiling void and can be passed through a 63mm diameter cutout, the typical size for down lighters, as shown below.
- The RESLOADE has an effective load of 10W and an operating temperature of approximately 40°C above ambient. It should be installed where air flow is not restricted. It should not be covered by insulating materials or positioned near any heat sources or heat sensitive objects.
- The RESLOADE is designed for Danlers Grid trailing edge dimmers (DQDGD) when dimming LED lamps and any other use of this product will invalidate our warrantee.
- For direct mains dimmable lamps the RESLOADE is connected at a suitable light fitting, in parallel across the load, between the dimmed variable live and neutral.
- For mains dimmable transformers the RESLOADE is connected across the primary (variable mains input) side of the transformer.
- The RESLOADE is designed to be placed into the ceiling void and can be passed through a 63mm diameter cutout, the typical size for down lighters.
- The RESLOADE has an effective load of 10W and an operating temperature of approximately 40°C above ambient. It should be installed where air flow is not restricted.
- It should not be covered by insulating materials or positioned near any heat sources or heat sensitive objects.
- Product code: RESLOADE
- Dimensions: 130mm length x 60mm diameter x 60mm
- Manufacturer: Danlers
Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.
Need more detailed specs?
Shipping
Sparks Direct delivers via courier to the UK only; the standard delivery charge is £6 + VAT for all orders under £100 + VAT. If your order is over £120, you get free delivery (unless there's a special delivery charge for the items you wish to order or you're in shipping zone C or D). Full details for shipping charges can be found via Terms and Conditions.
If the items you order are in stock and the order is placed before 1.00pm, delivery can be made within 1-2 working days. If the items are not in stock, we will inform you via email how long it will take or ask for your confirmation if there's a long lead time.
Returns
We offer 30-day returns for unwanted items - please email us to request a returns number which will need to be quoted when the items are returned. For faulty items or items damaged in transit, please advise via email, and an appropriate returns number will be provided. Full details concerning returns and refunds can be found via our Terms and Conditions.
