Manual Call Point Conventional with Resettable Plastic Element for Surface Mounting 470W Resistor & N\O 30VDC
£17.37
Ex. VAT(over £100+VAT, applies to zones A&B only , £6 +VAT otherwise)
Order online & collect in store
This is the MCP1A-R470SF-K013-01 conventional manual call point 470 ohm for surface mounting, in red, with resettable plastic element, 470W Resistor & N\O 30VDC. The MCP Indoor Call Point is a critical part of a fire alarm system. The MCP1A variant is supplied with a preconfigured internal resistor and clean contact electrical options.
This item is designed for use on conventional and non-addressable fire alarm systems. The call point is supplied with a plastic resettable element making it easy to reset after the call point has been activated.
Installation efficiency, flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.
Installation time and ultimately cost, are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique ‘plug and play’ concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block, where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple, but effective, with no re-termination required and no time wasted.
Through new standards and legislation, both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest ‘flex-ability’, the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.
All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.
Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard (Compliant markings only).
Manual Call Point Conventional with Resettable Plastic Element - Features
- Unique ‘Plug & Play’ installation concept
- Total ‘Flex-Ability’ in the choice of operating element
- Anti-Tamper facility
- Enhanced aesthetics
- Fully approved to the latest standards
- Backward compatibility
- CPD Approved
- Terminal block enables fast and simple installation with first fix capability
- High grade components enable highest reliability and extended operational life
- Comprehensive range – choice of glass or flexible element, resistors, function markings in a variety of colours
- Tamper proof design prevents accidental operation
- Fully certified and approved – see datasheet
Manual Call Point Conventional with Resettable Plastic Element - Specs
- Model: MCP1A-R470SF-K013-01
- Electrical configuration: 470W Resistor & N\O 30VDC
- Mounting: surface
- Operating elementL flexible
- Markings: EN54-11
- Cable Termination: 0.5-2.5mm2
- Maximum Voltage: 30VDC
- Humidity: 93± 3% non-condensing
- Operating Temperature: -100C to +550C
- Storage Temperature: -100C to +550C
- Ingress Protection (IP) Rating: IP24D
- Material: PC/ABS
- Weight: 130g Flush 180g Surface
- Colour: Red
- Dimensions: 87mm width x 87mm length, 27.5mm projection from wall, 32mm depth
Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.
Need more detailed specs?
Shipping
Sparks Direct delivers via courier to the UK only; the standard delivery charge is £6 + VAT for all orders under £100 + VAT. If your order is over £120, you get free delivery (unless there's a special delivery charge for the items you wish to order or you're in shipping zone C or D). Full details for shipping charges can be found via Terms and Conditions.
If the items you order are in stock and the order is placed before 1.00pm, delivery can be made within 1-2 working days. If the items are not in stock, we will inform you via email how long it will take or ask for your confirmation if there's a long lead time.
Returns
We offer 30-day returns for unwanted items - please email us to request a returns number which will need to be quoted when the items are returned. For faulty items or items damaged in transit, please advise via email, and an appropriate returns number will be provided. Full details concerning returns and refunds can be found via our Terms and Conditions.