Master Trailing Edge Touch LED Dimmer Switch 5-100W Euro Module in White 25x50mm, BG Electrical EMTDMW
£13.84
Ex. VAT
(over £100+VAT, applies to zones A&B only , £6 +VAT otherwise)
Order online & collect in store
This is the BG Electrical EMTDSW, a Master Trailing Edge Touch LED Dimmer Switch 5-100W Euro Module in White 25x50mm.
Note: this is the master LED dimmer switch Euro module, it can work on its own or, if you need to have a secondary switch option for 2-way lights, you can order EMTDSW.
The Euro Module range from British General allows you to build your own configuration from a wide a variety of interchangeable modules, plates and finishes.
This master trailing edge touch dimmer module allows you to control your light levels and set the mood.
The intelligent electronic circuit monitors the connected load and provides a soft-start with protection against thermal, current and voltage overload, and is suitable for dimming LED, dimmable CFL's and traditional lighting.
The white module can be inserted in to any British General Euro Module front plate - simply wire the module through the front plate and click the module in to place.
Quick and easy to install, these touch dimmer modules fit seamlessly into the euro module front plates either by themselves or alongside other components.
These modules provide flexibility for the end user to create a configuration that is customised for their need.
Master Trailing Edge Touch LED Dimmer Switch 5-100W Euro Module in White - Features
- 200W Rated (100W LED)
- Clips into British General Euro Module plates
- Intelligent trailing edge dimmers have a lower minimum load than leading edge dimmers, offering greater compatibility for LED, Halogen, CFL and Incandescent lamps
- Soft start brings the lights to a set level in around 1 second and extends the life of lamps
- Overload protection prevents failure if you mistakenly connect your dimmer to too many lights or transformers, and will turn the lights down or off until the load is corrected
- Support for lower wattage lamps eliminates flicker
- Adjust your light level for mood setting as well as energy saving with 2 way on/off
- Trailing edge dimmer suitable for LED halogen, CFL and incandescent lamps
- Touch control
- Clearly marked terminals with backed out captive screws for easy installation
- Soft start smooth dimming, silent operation and overload protection
- Minimum mounting box depth 25mm
- Certified to BS EN 60669-2-1
- ASTA Licence number 101
Master Trailing Edge Touch LED Dimmer Switch 5-100W Euro Module in White BG EMTDMW - Specs
- Standards: BS EN 60669-2-1
- Voltage: 200-250V AC
- ASTA Licence number 1019
- Load rating (min-max per module): 5-100W dimmable LED, 5-200W Tungsten/Incandescent, 20-200W Halogen, 5-100W Dimmable Compact Fluorescent (CFL)
- Overload protection prevents failure if you mistakenly connect your dimmer to too many lights or transformers, and will turn the lights down or off until the load is corrected
- Secondary switch option for 2-way lights (2nd switch in the circuit) - the secondary LED module is EMTDSW, to be ordered separately.
- Smooth dimming control
- Silent operation - no noise when dimming
- Support for lower wattage lamps eliminates flicker
- Type: Trailing Edge dimmer
- Terminal capacity: 3 x 1mm² 2 x 1.5mm² 1 x 2.5mm²
- RoHS directive. WEEE directive. CE Mark
- Dimensions: 50.2mm height, 25mm width, 25.7mm depth
- Minimum box depth: 25mm
Installation notes:
- Master can only be used in a one way switching circuit where one switch controls a light (or circuit) i.e. on or off.
- For two way switching, where a light (or circuit) is controlled by two switches, the Master touch dimmer must be used with a Secondary touch dimmer at the secondary location.
- A Master touch dimmer cannot be used in combination with a traditional light switch or any other dimmer switch.
| Switches & Sockets Specific | |
| Back Box Depth | 35mm |
| Brand | BG Electrical |
| Finish | White |
| Gang | 1 |
| Insert | White |
| Plate | Plastic |
| Plate Dimensions | 25mm x 50mm |
| Style | Euro Module |
| Type | LED Dimmer |
Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.
