Secondary Trailing Edge Touch LED Dimmer Switch 5-100W Euro Module in White 25x50mm (works with EMTDMW), BG Electrical EMTDSW
£3.76
Ex. VATThis item requires:
(over £100+VAT, applies to zones A&B only , £6 +VAT otherwise)
Order online & collect in store
This is the BG Electrical EMTDSW, a Secondary Trailing Edge Touch LED Dimmer Euro Module in White 25x50mm (to be used with EMTDMW).
Please note: this Euro touch dimmer switch works only with the master Euro Dimmer Switch EMTDMW, which needs to be ordered separately.
The Euro Module range from British General allows you to build your own configuration from a wide a variety of interchangeable modules, plates and finishes.
This secondary trailing edge touch dimmer module allows you to control your light levels and set the mood.
The intelligent electronic circuit monitors the connected load and provides a soft-start with protection against thermal, current and voltage overload, and is suitable for dimming LED, dimmable CFL's and traditional lighting.
The white module can be inserted in to any British General Euro Module front plate - simply wire the module through the front plate and click the module in to place.
Quick and easy to install, these touch dimmer modules fit seamlessly into the euro module front plates either by themselves or alongside other components.
These modules provide flexibility for the end user to create a configuration that is customised for their need.
Secondary Trailing Edge Touch LED Dimmer 5-100W Euro Module in White - Features
- 200W Rated (100W LED)
- Clips into British General Euro Module plates
- Secondary touch dimmer switch for 2-way lights
- Trailing edge dimmer suitable for LED halogen, CFL and incandescent lamps
- Intelligent trailing edge dimmers have a lower minimum load than leading edge dimmers, offering greater compatibility for LED, Halogen, CFL and Incandescent lamps
- Soft start brings the lights to a set level in around 1 second and extends the life of lamps
- Touch control
- Clearly marked terminals with backed out captive screws for easy installation
- Soft start smooth dimming, silent operation and overload protection
- Minimum mounting box depth 25mm
Secondary Trailing Edge Touch LED Dimmer 5-100W Euro Module in White - Specs
- Standards: BS EN 60669-2-1
- Voltage: 200-250V AC
- ASTA Licence number 1019
- Load rating (min-max per module): 5-100W dimmable LED, 5-200W Tungsten/Incandescent, 20-200W Halogen, 5-100W Dimmable Compact Fluorescent (CFL)
- Overload protection prevents failure if you mistakenly connect your dimmer to too many lights or transformers, and will turn the lights down or off until the load is corrected
- Smooth dimming control
- Silent operation - no noise when dimming
- Support for lower wattage lamps eliminates flicker
- Type: Trailing Edge dimmer
- Terminal capacity: 3 x 1mm² 2 x 1.5mm² 1 x 2.5mm²
- RoHS directive. WEEE directive. CE Mark
- Dimensions: 50.2mm height, 25mm width, 25.7mm depth
- Minimum box depth: 25mm
Installation notes:
- Master can only be used in a one way switching circuit where one switch controls a light (or circuit) i.e. on or off.
- For two way switching, where a light (or circuit) is controlled by two switches, the Master touch dimmer must be used with a Secondary touch dimmer at the secondary location.
- A Master touch dimmer cannot be used in combination with a traditional light switch or any other dimmer switch.
Switches & Sockets Specific | |
Back Box Depth | 25mm |
Brand | BG Electrical |
Finish | White |
Gang | 1 |
Insert | White |
Plate | Plastic |
Plate Dimensions | 25mm x 50mm |
Style | Euro Module |
Type | LED Dimmer |
Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.