1 Gang 2 Way Trailing Edge LED Dimmer rated at 200W (100W LED) Brushed Steel Flat Plate with Screws BG Nexus SBS81

This is the BG Nexus SBS81 1 Gang 2 Way Trailing Edge LED Dimmer rated at 200W (100W LED) Brushed Steel Flat Plate with Screws available at Sparks.

It is part of a range of Screwed Flatplate dimmer switches which have an ultra-slim flat plate that sits flush against the wall, making them ideal for modern interiors.

• This trailing edge single dimmer switch from British General allows you to control your light levels and set the mood.
• The intelligent electronic circuit monitors the connected load and provides a soft-start with protection against thermal, current and voltage overload, and is suitable for dimming LED, dimmable CFL's and traditional lighting.
• This dimmer has a premium brushed steel finish with anti-fingerprint lacquer and an ultra-slim flat plate that sits flush against the wall, making it ideal for modern interiors.
• These intelligent trailing-edge dimmers have a lower minimum load than leading-edge dimmers, offering greater compatibility for LED, Halogen, CFL and incandescent lamps.
• Furthermore, the soft start brings the lights to a set level in around 1 second and extends the life of lamps. 
• Overload protection prevents failure if you mistakenly connect your dimmer to too many lights or transformers, and will turn the lights down or off until the load is corrected

1 Gang 2 Way Trailing Edge LED Dimmer 200W Brushed Steel Flat Plate - Features

• Smooth dimming control
• Soft start extends the life of lamps
• Adjust your light level for mood setting as well as energy saving with 2 way on/off
• Intelligent electronic circuit monitors the connected load and provides a soft-start with protection against thermal, current and voltage overload
• Suitable for use with good quality electronic or wire wound transformers. Can also be used with good quality mains voltage halogen lamps incorporating GU10 bases
• Silent operation - no noise when dimming
• Support for lower wattage lamps eliminates flicker
• Rotary dimmer control with push on/off function
• Moisture control gasket, prevents tarnishing from new plaster
• Screwed flat plate sits flush against the wall
• Fixed integrated plastic gasket to protect metal edges from moisture
• Ultra-slim flat-plate that sits flush against the wall, with no visible plastic around switches
• Overload protection
• Manufactured to BS EN 60669-2-1
• Suitable for LED, Halogen, CFL & Incandescent lamps
• Minimum mounting box depth: 35mm

1 Gang 2 Way Trailing Edge LED Dimmer 200W Brushed Steel Flat Plate BG Nexus SBS81 - Specs

• It is a single gang LED dimmer, trailing edge
• Plate: flat plate with visible screws on the plate
• Finish: brushed steel, part of the SBS range from BG Nexus
• Model: BG Nexus SBS81 1 gang 2-way push type trailing edge 200W dimmer
• Standard(s): BS EN 60669-2-1
• Asta Approval: License Number 1019. CE Mark
• Voltage: 200-250V AC
• Load Rating Max/Min per module - Dimmable LED: 5-100W
• Load Rating Max/Min per module - Tungsten/Incandescent: 5-200W
• Load Rating Max/Min per module - Halogen: 20-200W
• Load Rating Max/Min per module - Dimmable Compact Fluorescent (CFL): 5-100W
• Type: Trailing Edge
• Terminal Capacity: 3 x 1mm² 2 x 1.5mm² 1 x 2.5mm²
• RoHS Directive: Yes
• WEEE Directive: Yes
• Mounting Box Depth (Min): 35mm
• Fixing Centres: 60.3mm
• Size: 86mm x 86mm x 45mm

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

• SBS81 SBS82 datasheet.pdf (744.46 kB)
• SBS81P instructions.pdf (557.2 kB)
• SBS81P datasheet.pdf (744.46 kB)