Wisebox Kit 4 Channel Receiver IP54 with 4-Button Keypad Switch and Key Fob, Wireless ON/OFF and PIR/Timelag Lighting Controls Kit

The new version of Wisebox - the Wise Box Kit 4 - is an updated version of the original wisebox, featuring 4 x PIR timer dials for each circuit, which allows up to 16 PIRs to be connected.

The kit comes complete with the wisebox, a 4-button keyfob and a 4-button wall switch keypad.

Note: This item is non-returnable; because it is an electronic product, we cannot take it back for a refund as "unwanted".

• The Wisebox unit will control your lights, water features, electric shutters and gates etc.
• Once programmed, place the indoor wireless switch in a suitable location and the installation is complete.
• The remote control allows you to enjoy switching your circuits from anywhere in your garden or home.
• The WiseBox Kit has a receiver that has four 5-amp circuits with a maximum amperage of 20 amps.
• The WiseBox kit can achieve up to a 150-meter range with a clear line of sight.
• These circuits can be changed from switching to an open circuit.
• Each circuit on the WiseBox is fused individually with a 5 amp fuse to protect all the circuits.

Wisebox Kit 4 Channel Receiver, Keyfob and Switch - Programming options

Programming Option 1: Single Button On and Off

Programming this way will create an on and off from a single button on a wireless switch/remote.

Programming Option 2: Dual button On and Off

Programming this way will assign your On and Off to 2 separate buttons.

Programming Option 3: PIR / Timelag function

Programming this way only sends an ON signal, which is then switched off by a pre-set countdown timer. If you program to a PIR, then the PIR will reset itself to the pre-set time every time the sensor is triggered. If programmed to a switch or remote, then the countdown will switch off when it reaches 0 seconds.

Wise Switches / Remotes

The keyfob and the wall switch included within the kit both have four buttons. Once you have programmed the button of your choice to link with a channel, that button will switch the channel's circuit on / off. You can add additional switches and remotes to a WiseBox if you wish, up to a maximum of 16.

Wisebox Kit 4 Channel Receiver, Keyfob, and Switch - Specs

• IP rating: IP54 rated, it can be used outdoor
• Detection range: 200m
• Dimensions: 80mm depth, 150mm height, 200mm width
• Amperage: 20A
• Max. amps/circuit: 5A
• Minimum wattage/circuit: 1W
• Voltage: 240V mains voltage

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

• WISEBOX instructions.pdf (645.69 kB)