Wago 2104-1201 2-Conductor DIN-Rail Terminal Block Lever + Push-in CAGE CLAMP 4mm2 32A in Grey
£1.23
Ex. VAT
(over £100+VAT, applies to zones A&B only , £6 +VAT otherwise)
Order online & collect in store
This is the Wago 2104-1201 DIN-Rail Terminal Block Push-in + Lever 2-Conductor in Grey 4mm2. It is a 2-conductor through terminal block; with lever and Push-in CAGE CLAMP®; 4 mm²; with test port; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 4,00 mm²; gray
Wago 2104-1201 DIN-Rail Terminal Block Push-in + Lever - Specs
- Ratings per: IEC/EN
- Ratings per: IEC/EN 60947-7-1
- Nominal voltage (III/3): 800V
- Rated impulse voltage (III/3): 8kV
- Rated current: 32A
- Legend (ratings) (III / 3): Overvoltage category III / Pollution degree 3
- Ratings per IEC/EN: 2
- Rated current 2: 40A
- Approvals per UL: 1059
- Rated voltage UL (Use Group B): 600V
- Rated current UL (Use Group B): 30A
- Rated voltage UL (Use Group C): 600V
- Rated current UL (Use Group C): 30A
- Approvals per: CSA 22.2 No 158
- Rated voltage CSA (Use Group B): 600V
- Rated current CSA (Use Group B): 30A
- Rated voltage CSA (Use Group C): 600V
- Rated current CSA (Use Group C): 30A
- Ratings per: ATEX: PTB 20 ATEX 1006 U / IECEx: PTB 20.0012U (Ex eb IIC Gb)
- Rated voltage EN (Ex e II): 550V
- Rated current (Ex e II): 30A
- Power loss, per pole (potential): 1.362W
- Rated current IN for specified power loss: 32A
- Resistance value for specified, current-dependent power loss: 0.001Ω
- Connection points: 2
- Total number of potentials: 1
- Number of levels: 1
- Number of jumper slots: 2
- Connection: 1
- Connection technology: Push-in CAGE CLAMP®
- Actuation type: Lever
- Connectable conductor materials: Copper
- Nominal cross-section: 4 mm²
- Solid conductor: 0.5 … 6 mm² / 20 … 10 AWG
- Solid conductor; push-in termination: 1.5 … 6 mm² / 14 … 10 AWG
- Fine-stranded conductor: 0.5 … 6 mm² / 20 … 10 AWG
- Fine-stranded conductor; with insulated ferrule: 0.5 … 4 mm² / 20 … 12 AWG
- Fine-stranded conductor; with ferrule; push-in termination: 1.5 … 4 mm² / 18 … 12 AWG
- Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
- Strip length: 11 … 13 mm / 0.43 … 0.51 inches
- Wiring direction: Front-entry wiring
- Connection: 2
- Actuation type 2: Operating tool
- Width: 6.2 mm / 0.244 inches
- Height: 70 mm / 2.756 inches
- Depth from upper-edge of DIN-rail: 32.9 mm / 1.295 inches
- Mounting type: DIN-35 rail
- Marking level: Center/side marking
- Color: gray
- Material group: I
- Insulation material: Polyamide (PA66)
- Flammability class per UL94: V0
- Fire load: 0.186MJ
- Weight: 10.3g
- Processing temperature: -35 … +85 °C
- Continuous operating temperature: -60 … +105 °C
Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.
Need more detailed specs?
Shipping
Sparks Direct delivers via courier to the UK only; the standard delivery charge is £6 + VAT for all orders under £100 + VAT. If your order is over £120, you get free delivery (unless there's a special delivery charge for the items you wish to order or you're in shipping zone C or D). Full details for shipping charges can be found via Terms and Conditions.
If the items you order are in stock and the order is placed before 1.00pm, delivery can be made within 1-2 working days. If the items are not in stock, we will inform you via email how long it will take or ask for your confirmation if there's a long lead time.
Returns
We offer 30-day returns for unwanted items - please email us to request a returns number which will need to be quoted when the items are returned. For faulty items or items damaged in transit, please advise via email, and an appropriate returns number will be provided. Full details concerning returns and refunds can be found via our Terms and Conditions.
