Wall PIR Presence Detector with Adjustable Lux Level Sensing and Time Delay, CP Electronics SPIR-PRM Occupancy Sensor

This is the CP Electronics SPIR-PRM, a Wall Mounted PIR Presence Detector (occupancy sensor) with neutral connection for back box wall mounting (back box to be purchased separately), ideal for occupancy detection. 

The modern CP Electronics SPIR-PRM presence detector switches are designed to provide automatic control of lighting, heating or ventilation loads. They detect movement using a PIR sensor which subsequently switch the load on or OFF; a photocell is included to prevent lights from turning on during daytime to save on electricity. If an area is no longer occupied the load will switch off after an adjustable time out period. 

An internal light sensor provides additional energy, saving in lighting applications. When an area is occupied, the lighting is only turned on when the level of natural light goes below a preset level. A selectable security mode switches the lights on for a period of 2 hours when it gets dark, regardless of occupancy, to give the impression of a building being occupied in order to ward off potential intruders. 

It fits a single gang standard switch box / backbox or a shallow back box when using the supplied extender, and it works with a wide variety of load types including low energy CFL and LED lamps. 

Wall PIR Presence Detector Switch - Features

• It provides presence detection and lux level sensing - auto ON, auto OFF
• It works with any type of lamp, including LED lamps. 
• It has a neutral connection. 
• You can adjust time delay and lux settings via pots. 
• It is suitable for lighting, heating, and ventilation loads. 
• It comes with a 5 year manufacturer warranty. 
• An internal light sensor provides additional energy saving in lighting applications. When an area is occupied lighting is only switched on when the level of natural light is below a preset level.
• A selectable security mode switches the lights on for a period of 2 hours when it gets dark, regardless of occupancy, to give the impression of a building being occupied.
• When installing, avoid direct sunlight entering the sensor, don't site within 1m of forced air heating or ventilation, don't site within 1m of any lighting, and do not fix on a vibrating surface. 

CP Electronics SPIR-PRM Wall PIR Occupancy Sensor - Technical Specs

• Model: CP Electronics SPIR-PRM Basic switching, concealed fixings, wall, back box mounted, PIR, occupancy sensor
• Fixing: concealed fixings, for wall mounting; back box mounted. 
• PIR occupancy sensor for wall mounting indoor. 
• Supply voltage: 220-240 Volts AC Hz
• Load rating: 16A resistive load; 10A incandescent lighting; 6A fluorescent lighting; 3A compact fluorescent lighting, low energy lighting, low voltage lighting (switch primary of transformer), fans and ventilation equipment. Switch SON lighting load via a contactor. 
• It works with LED loads up to 3A
• Quartz halogen heaters: 2600W max, recommended timing 30 minutes, for lower timing switch via contactor
• Time out period: adjustable 10 seconds to 60 minutes in two ranges.
• Light level: Optional adjustment by thumbwheel light to dark
• Terminal capacity: 2.5mm2
• Material: Flame retardant ABS
• Dimensions: 86mm x 86mm, 19mm projection from wall, max. 23mm depth in the backbox
• Type: Class 2 electrical rated
• Temperature: -10 degrees to 35 degrees Celsius
• Conformity: EN60669-2-1, EN55015. CE Mark
• Model: CP Electronics SPIR-PRM Concealed fixings, back box mounted, wall, PIR, occupancy sensor

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Need more detailed specs?

• SPIRPRM-data.pdf (744.4 kB)