21 Way Ryefield Board taking 60A Fuse Units, 21 Way TPN Fuseboard TP21AVS60

Model No. RY21

Availability: Usually 3-5 days

£2,170.30

Ex. VAT

List price ~~£2,959.35~~

You save £789.05!

Qty:

Free Delivery
(over £100+VAT, applies to zones A&B only , £6 +VAT otherwise)

Click & Collect
Order online & collect in store

Ask A Question

Introducing Ryefield Engineering TP21AVS60 21 Way Ryefield Board taking 60A Fuse Units, 21 Way TPN Fuseboard available at Sparks for the best price!

Ryelfield TPN Fuseboard - The Ryefield distribution boards are some of the most popular LV distribution fuseboards in the UK market, since they offer a robust electrical wiring solution especially for a multi-dwelling residential setting.

Ideally to be used in conjunction with metering equipment, since they distribute the power from the main cut-out to the dwelling meters. This Ryefield board is suitable for up to 21 flats, allowing 21 single ways using 60A fuses.

Please note: the carriage charge for this Ryefield board is £35 + VAT (which will automatically be added at Checkout) due to the size and weight of the board.

These boards are proven as the most cost-effective solution. Please note that Ryefield is pre-approved by DNO LV boards to distribute power in HMOs.

21 Way 60A Ryefield Board TP 21 AVS60 - Features

Materials: the boards are made of 18g steel sheets with the case back drilled and embossed for wall fixing.
Lift off hinged cover with padlocking attachment and Multilock.
Retro-fit Surge Ready for 18th Edition Compliance.
Back of case drilled and embossed for wall fixing.
Model: Ryefield Engineering TP21AVS/60 21 Way Ryefield Board taking 60A Fuse Units
Provide separate circuit protection for each dwelling (circuit).
Standard main brass clamp and pinching screw circuit terminals - one per fuse unit.
Standard main brass clamps: adjustable, to accept 25mm2 - 120mm2 stranded conductors.
Brass earth block with pinching screw terminals and PME link.
Blank removable gland plates top and bottom as standard.
The neutral clamp with pinching screw circuit terminals: one per fuse unit.
Standard busbar: current rating of max. 400A.
Plain removable plates top and bottom as standard.
Installation: it is recommended to use registered electricians to install this Ryefield board.

Note: The Ryefield TPN pattern fuse boards range from 6 to 48 fuse ways spread over three phases as standard, specials on request. Email us for a quote.

21 Way Ryefield Board TP21AVS60 taking 60A fuse units - Specs

60 amp service type fuse units, it comes complete with 21x 60A fuses
Dimensions: 815mm height x 500mm width x 180mm depth
L1/L2/L3 in a 7/7/7 combination.
The case is fabricated from 18g steel Sheets. Cases fabricated from 1.2 mm2 steel and powder coated.
It provides 21 single ways, suitable for up to 21 flats.
Finish: Case enamelled epoxy polyester powder dark grey shade. Steel screws and component parts zinc plated.
Rated fused short circuit current 50kA at 415V.
Dielectric Test = 2.5kV for 1 minute.

At Sparks you can get some of the most affordable Ryefield Boards, including the 21 Way TPN Distribution Board taking 60A fuses - cheaper than anywhere else! Order this Ryefield board online now!

Consumer Units
Amperage Rating	60A
Compliance	18th Edition Compliance
Domestic/Industrial	Domestic
IP rating	IP2XC rated
Length	815mm
Manufacturer	Ryefield Engineering
Mounting	Wall Mounting
Number of Ways	21
Range	Ryefield Distribution Boards
RCD included	no
Width	500mm
Depth	180mm

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.

Shipping

Sparks Direct delivers via courier to the UK only; the standard delivery charge is £6 + VAT for all orders under £100 + VAT. If your order is over £120, you get free delivery (unless there's a special delivery charge for the items you wish to order or you're in shipping zone C or D). Full details for shipping charges can be found via Terms and Conditions.

If the items you order are in stock and the order is placed before 1.00pm, delivery can be made within 1-2 working days. If the items are not in stock, we will inform you via email how long it will take or ask for your confirmation if there's a long lead time.

Returns

We offer 30-day returns for unwanted items - please email us to request a returns number which will need to be quoted when the items are returned. For faulty items or items damaged in transit, please advise via email, and an appropriate returns number will be provided. Full details concerning returns and refunds can be found via our Terms and Conditions.