6 Way Ryefield Board taking 100A Fuse Units, Ryefield TP6AHS100 TPN 6 Way Distribution Board
£1,122.00
Ex. VAT(over £100+VAT, applies to zones A&B only , £6 +VAT otherwise)
Order online & collect in store
This is the Ryefield Engineering TP6AHS100 6 Way Ryefield Board taking 100A Fuse Units, TPN 6 Way Ryefield Distribution Board.
Ryefield is pre-approved by DNO LV boards to distribute power in HMOs. These boards are proven as the most cost-effective solution. Used in conjunction with metering equipment, since they distribute the power from the main cut-out to the dwelling meters.
Please note: the carriage charge for this Ryefield board is £35 + VAT (which will automatically be added at Checkout) due to the size and weight of the board.
Ryelfield TPN Fuseboard. This is a 6 way Ryefield board taking 100A fuses (included). This TPN Ryefield board is ideal for providing separate circuit protection for each dwelling in a multiple dwelling setting or HMO. You can use it for up to 6 x 3 single phase (up to 6 flats), using 100A fuses.
The Ryefield distribution boards are some of the most popular LV distribution fuseboards in the UK market, since they offer a robust electrical wiring solution especially for a multi-dwelling residential setting.
6 Way Ryefield Board TP6AHS100 taking 100A Fuses - Features
- Materials: the boards are made of 18g steel sheets with the case back drilled and embossed for wall fixing.
- Retro-fit Surge Ready for 18th Edition Compliance.
- Lift off hinged cover with padlocking attachment and Multilock.
- Standard main incoming clamps are adjustable to accept 25 mm2 to 120 mm2 stranded conductors.
- Provide separate circuit protection for each dwelling (circuit).
- Back of case drilled and embossed for wall fixing.
- Standard main brass clamps: adjustable
- Finish: Case powder coated Dark Grey Shade BS381C 632 Full Gloss, Internal parts galvanised steel, fixings zinc plated.
- Standard main brass clamp and pinching screw circuit terminals - one per fuse unit.
- Brass earth block with pinching screw terminals and PME link.
- The neutral clamp with pinching screw circuit terminals: one per fuse unit.
- Standard busbar: current rating of max. 400A.
- Plain removable plates top and bottom as standard.
- 6 way Ryefield board complete with 6 x 100A fuses
- Model: Ryefield Engineering TP6AHS100 Three Phase Distribution Board taking 6x 100A Fuse Units (included)
- Installation: it is recommended to use registered electricians to install this Ryefield board.
Note: the Ryefield TPN pattern fuse boards range from 6 to 48 fuse ways spread over three phases as standard, specials on request. Email us for quotes.
TP6AHS100 6 Way Ryefield Distribution Board 100A - Specifications
- 100 amp service type fuse units.
- L1/L2/L3 in a 2/2/2 combination.
- Rated fused short circuit current 50kA at 415V.
- Maximum rating of busbars 400amp (as standard).
- Horizontal arrangement
- Maximum cable size 125mm
- Dielectric Test = 2.5kV for 1 minute.
- Dimensions: 535mm height, 400mm width, 180mm depth.
- Finish: Case enamelled epoxy polyester powder dark grey shade. Steel screws and component parts zinc plated
Note: Picture is informative. At Sparks you can get some of the most affordable Ryefield Boards - cheaper than anywhere else! Order this Ryefield board online now!
Consumer Units | |
Amperage Rating | 100A |
Compliance | 18th Edition Compliance |
Domestic/Industrial | Domestic |
IP rating | IP2XC rated |
Length | 535mm |
Manufacturer | Ryefield Engineering |
Mounting | Wall Mounting |
Number of Ways | 6 |
Range | Ryefield Distribution Boards |
RCD included | no |
Width | 400mm |
Depth | 180mm |
Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.