Hager JK118BG Invicta 3 18 Ways Triple Pole (125A Incoming 63A Outgoing) Distribution Board

This is the Hager 18 Triple Pole Ways Invicta 3 (125A Incoming 63A Outgoing), industrial distribution board.

Please note: this board does NOT include the incoming / outgoing devices; these need to be ordered separately. 

Hager JK118BG Invicta 3 18 Ways Triple Pole

• When fitting a meter pack a JK101SE (300mm) is required to provide additional incoming cable space.
• Surface mounted steel enclosures.
• Enclosure degree of protection: IP3X
• Obround protected cable entry points
• Dimensions: 1100mm Height x 465mm Width x 132.5mm Depth
• Type: 18 Triple Pole or 54 Single Pole Ways
• The Neutral Bars have transparent Ip2X shrouding to make cabling easier
• Incoming: 125A
• Outgoing: 63A
• Enclosures are available with plain or glazed doors.
• The earth and neautral bars are positioned and designed for simpler installation
• Fully shrouded copper busbar, rated 25kA short circuit conditional current.
• L1, L2, L3 on moulding are visible with and without the front cover fitted, which show through the cover for ease of phase identification
• Supplied without incoming and outgoing devices.
• A hager incoming kit must be used.
• Complies with BS EN 60439-3

Please note: it is Supplied without incoming and outgoing devices

Requires one of the following Incomer Kits:

JK11003S
JK11004S
JK11253S
JK10634RH
JK11004RH

Note: Some images and pictures are for reference only. The item may differ from the image/picture due to manufacturer's change. Should you require the exact item in the picture, please call or email us to enquire.